|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | USAGE | OPTIONS | VARIABLES | ENVIRONMENT VARIABLES | SEE ALSO | COLOPHON |
|
|
|
VGIMPORT(8) System Manager's Manual VGIMPORT(8)
vgimport — Register exported volume group with system
vgimport option_args position_args
[ option_args ]
vgimport makes exported VGs known to the system again, perhaps
after moving the PVs from a different system.
vgexport clears the VG system ID, and vgimport sets the VG system
ID to match the host running vgimport (if the host has a system
ID).
Import specified VGs.
vgimport VG|Tag|Select ...
[ -S|--select String ]
[ COMMON_OPTIONS ]
Import all VGs.
vgimport -a|--all
[ COMMON_OPTIONS ]
Common options for command:
[ -f|--force ]
[ --reportformat basic|json ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
-a|--all
Import all visible VGs.
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override
lvm.conf(5) settings. The String arg uses the same format
as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--devices PV
Devices that the command can use. This option can be
repeated or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must
exist in /etc/lvm/devices/ and is managed with the
lvmdevices(8) command. This overrides the lvm.conf(5)
devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
-f|--force ...
Override various checks, confirmations and protections.
Use with extreme caution.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This
information is in addition to information enabled by the
lvm.conf log/journal setting. command: record information
about the command. output: record the default command
output. debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--longhelp
Display long help text.
--nohints
Do not use the hints file to locate devices for PVs. A
command may read more devices to find PVs when hints are
not used. The command will still perform standard hint
file invalidation where appropriate.
--nolocking
Disable locking.
--profile String
An alias for --commandprofile or --metadataprofile,
depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
--reportformat basic|json
Overrides current output format for reports which is
defined globally by the report/output_format setting in
lvm.conf(5). basic is the original format with columns
and rows. If there is more than one report per command,
each report is prefixed with the report name for
identification. json produces report output in JSON
format. See lvmreport(7) for more information.
-S|--select String
Select objects for processing and reporting based on
specified criteria. The criteria syntax is described by
--select help and lvmreport(7). For reporting commands,
one row is displayed for each object matching the
criteria. See --options help for selectable object
fields. Rows can be displayed with an additional
"selected" field (-o selected) showing 1 if the row
matches the selection and 0 otherwise. For non-reporting
commands which process LVM entities, the selection is used
to choose items to process.
-t|--test
Run in test mode. Commands will not update metadata. This
is implemented by disabling all metadata writing but
nevertheless returning success to the calling function.
This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it
believes has changed but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase
the detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always
assume the answer yes. Use with extreme caution. (For
automatic no, see -qq.)
VG Volume Group name. See lvm(8) for valid names.
Tag Tag name. See lvm(8) for information about tag names and
using tags in place of a VG, LV or PV.
Select Select indicates that a required positional parameter can
be omitted if the --select option is used. No arg appears
in this position.
String See the option description for information about the
string content.
Size[UNIT]
Size is an input number that accepts an optional unit.
Input units are always treated as base two values,
regardless of capitalization, e.g. 'k' and 'K' both refer
to 1024. The default input unit is specified by letter,
followed by |UNIT. UNIT represents other possible input
units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
is EiB. (This should not be confused with the output
control --units, where capital letters mean multiple of
1000.)
See lvm(8) for information about environment variables used by
lvm. For example, LVM_VG_NAME can generally be substituted for a
required VG parameter.
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7),
lvmthin(7), lvmvdo(7), lvmautoactivation(7)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for
this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
This page was obtained from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
Red Hat, Inc. LVM TOOLS 2.03.25(2)-git (2024-05-16) VGIMPORT(8)
Pages that refer to this page: lvmsystemid(7), lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|