|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
|
LVMCACHE(7) LVMCACHE(7)
lvmcache — LVM caching
lvm(8) includes two kinds of caching that can be used to improve
the performance of a Logical Volume (LV). When caching, varying
subsets of an LV's data are temporarily stored on a smaller,
faster device (e.g. an SSD) to improve the performance of the LV.
To do this with lvm, a new special LV is first created from the
faster device. This LV will hold the cache. Then, the new fast LV
is attached to the main LV by way of an lvconvert command.
lvconvert inserts one of the device mapper caching targets into
the main LV's i/o path. The device mapper target combines the
main LV and fast LV into a hybrid device that looks like the main
LV, but has better performance. While the main LV is being used,
portions of its data will be temporarily and transparently stored
on the special fast LV.
The two kinds of caching are:
• A read and write hot-spot cache, using the dm-cache kernel
module. This cache tracks access patterns and adjusts its
content deliberately so that commonly used parts of the main LV
are likely to be found on the fast storage. LVM refers to this
using the LV type cache.
• A write cache, using the dm-writecache kernel module. This
cache can be used with SSD or PMEM devices to speed up all
writes to the main LV. Data read from the main LV is not stored
in the cache, only newly written data. LVM refers to this
using the LV type writecache.
1. Identify main LV that needs caching
The main LV may already exist, and is located on larger, slower
devices. A main LV would be created with a command like:
# lvcreate -n main -L Size vg /dev/slow_hhd
2. Identify fast LV to use as the cache
A fast LV is created using one or more fast devices, like an SSD.
This special LV will be used to hold the cache:
# lvcreate -n fast -L Size vg /dev/fast_ssd
# lvs -a
LV Attr Type Devices
fast -wi------- linear /dev/fast_ssd
main -wi------- linear /dev/slow_hhd
3. Start caching the main LV
To start caching the main LV, convert the main LV to the desired
caching type, and specify the fast LV to use as the cache:
using dm-cache (with cachepool):
# lvconvert --type cache --cachepool fast vg/main
using dm-cache (with cachevol):
# lvconvert --type cache --cachevol fast vg/main
using dm-writecache (with cachevol):
# lvconvert --type writecache --cachevol fast vg/main
For more alternatives see:
dm-cache command shortcut
dm-cache with separate data and metadata LVs
4. Display LVs
Once the fast LV has been attached to the main LV, lvm reports
the main LV type as either cache or writecache depending on the
type used. While attached, the fast LV is hidden, and renamed
with a _cvol or _cpool suffix. It is displayed by lvs -a. The
_corig or _wcorig LV represents the original LV without the
cache.
using dm-cache (with cachepool):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cpool] cache main_corig(0)
[fast_cpool] cache-pool fast_pool_cdata(0)
[fast_cpool_cdata] linear /dev/fast_ssd
[fast_cpool_cmeta] linear /dev/fast_ssd
[main_corig] linear /dev/slow_hhd
using dm-cache (with cachevol):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cvol] cache main_corig(0)
[fast_cvol] linear /dev/fast_ssd
[main_corig] linear /dev/slow_hhd
using dm-writecache (with cachevol):
# lvs -ao+devices
LV Pool Type Devices
main [fast_cvol] writecache main_wcorig(0)
[fast_cvol] linear /dev/fast_ssd
[main_wcorig] linear /dev/slow_hhd
5. Use the main LV
Use the LV until the cache is no longer wanted, or needs to be
changed.
6. Stop caching
To stop caching the main LV and also remove unneeded cache pool,
use the --uncache:
# lvconvert --uncache vg/main
# lvs -a
LV VG Attr Type Devices
main vg -wi------- linear /dev/slow_hhd
To stop caching the main LV, separate the fast LV from the main
LV. This changes the type of the main LV back to what it was
before the cache was attached.
# lvconvert --splitcache vg/main
# lvs -a
LV VG Attr Type Devices
fast vg -wi------- linear /dev/fast_ssd
main vg -wi------- linear /dev/slow_hhd
7. Create a new LV with caching
A new LV can be created with caching attached at the time of
creation using the following command:
# lvcreate --type cache|writecache -n Name -L Size
--cachedevice /dev/fast_ssd vg /dev/slow_hhd
The main LV is created with the specified Name and Size from the
slow_hhd. A hidden fast LV is created on the fast_ssd and is
then attached to the new main LV. If the fast_ssd is unused, the
entire disk will be used as the cache unless the --cachesize
option is used to specify a size for the fast LV. The
--cachedevice option can be repeated to use multiple disks for
the fast LV.
option args
--cachepool CachePoolLV|LV
Pass this option a cachepool LV or a standard LV. When using a
cache pool, lvm places cache data and cache metadata on different
LVs. The two LVs together are called a cache pool. This has a
bit better performance for dm-cache and permits specific
placement and segment type selection for data and metadata
volumes. A cache pool is represented as a special type of LV
that cannot be used directly. If a standard LV is passed with
this option, lvm will first convert it to a cache pool by
combining it with another LV to use for metadata. This option
can be used with dm-cache.
--cachevol LV
Pass this option a fast LV that should be used to hold the cache.
With a cachevol, cache data and metadata are stored in different
parts of the same fast LV. This option can be used with dm-
writecache or dm-cache.
--cachedevice PV
This option can be used in place of --cachevol, in which case a
cachevol LV will be created using the specified device. This
option can be repeated to create a cachevol using multiple
devices, or a tag name can be specified in which case the
cachevol will be created using any of the devices with the given
tag. If a named cache device is unused, the entire device will
be used to create the cachevol. To create a cachevol of a
specific size from the cache devices, include the --cachesize
option.
dm-cache block size
A cache pool will have a logical block size of 4096 bytes if it
is created on a device with a logical block size of 4096 bytes.
If a main LV has logical block size 512 (with an existing xfs
file system using that size), then it cannot use a cache pool
with a 4096 logical block size. If the cache pool is attached,
the main LV will likely fail to mount.
To avoid this problem, use a mkfs option to specify a 4096 block
size for the file system, or attach the cache pool before running
mkfs.
dm-writecache block size
The dm-writecache block size can be 4096 bytes (the default), or
512 bytes. The default 4096 has better performance and should be
used except when 512 is necessary for compatibility. The dm-
writecache block size is specified with --cachesettings
block_size=4096|512 when caching is started.
When a file system like xfs already exists on the main LV prior
to caching, and the file system is using a block size of 512,
then the writecache block size should be set to 512. (The file
system will likely fail to mount if writecache block size of 4096
is used in this case.)
Check the xfs sector size while the fs is mounted:
# xfs_info /dev/vg/main
Look for sectsz=512 or sectsz=4096
The writecache block size should be chosen to match the xfs
sectsz value.
It is also possible to specify a sector size of 4096 to mkfs.xfs
when creating the file system. In this case the writecache block
size of 4096 can be used.
The writecache block size is displayed by the command:
lvs -o writecacheblocksize VG/LV
dm-writecache memory usage
The amount of main system memory used by dm-writecache can be a
factor when selecting the writecache cachevol size and the
writecache block size.
• writecache block size 4096: each 100 GiB of writecache cachevol
uses slightly over 2 GiB of system memory.
• writecache block size 512: each 100 GiB of writecache cachevol
uses a little over 16 GiB of system memory.
dm-writecache settings
To specify dm-writecache tunable settings on the command line,
use:
--cachesettings 'option=N' or
--cachesettings 'option1=N option2=N ...'
For example, --cachesettings 'high_watermark=90
writeback_jobs=4'.
To include settings when caching is started, run:
# lvconvert --type writecache --cachevol fast \
--cachesettings 'option=N' vg/main
To change settings for an existing writecache, run:
# lvchange --cachesettings 'option=N' vg/main
To clear all settings that have been applied, run:
# lvchange --cachesettings '' vg/main
To view the settings that are applied to a writecache LV, run:
# lvs -o cachesettings vg/main
Tunable settings are:
high_watermark = <percent>
Start writeback when the writecache usage reaches this
percent (0-100).
low_watermark = <percent>
Stop writeback when the writecache usage reaches this
percent (0-100).
writeback_jobs = <count>
Limit the number of blocks that are in flight during
writeback. Setting this value reduces writeback
throughput, but it may improve latency of read requests.
autocommit_blocks = <count>
When the application writes this amount of blocks without
issuing the FLUSH request, the blocks are automatically
committed.
autocommit_time = <milliseconds>
The data is automatically committed if this time passes
and no FLUSH request is received.
fua = 0|1
Use the FUA flag when writing data from persistent memory
back to the underlying device. Applicable only to
persistent memory.
nofua = 0|1
Don't use the FUA flag when writing back data and send the
FLUSH request afterwards. Some underlying devices perform
better with fua, some with nofua. Testing is necessary to
determine which. Applicable only to persistent memory.
cleaner = 0|1
Setting cleaner=1 enables the writecache cleaner mode in
which data is gradually flushed from the cache. If this
is done prior to detaching the writecache, then the
splitcache command will have little or no flushing to
perform. If not done beforehand, the splitcache command
enables the cleaner mode and waits for flushing to
complete before detaching the writecache. Adding
cleaner=0 to the splitcache command will skip the cleaner
mode, and any required flushing is performed in device
suspend.
max_age = <milliseconds>
Specifies the maximum age of a block in milliseconds. If a
block is stored in the cache for too long, it will be
written to the underlying device and cleaned up.
metadata_only = 0|1
Only metadata is promoted to the cache. This option
improves performance for heavier REQ_META workloads.
pause_writeback = <milliseconds>
Pause writeback if there was some write I/O redirected to
the origin volume in the last number of milliseconds.
dm-writecache using metadata profiles
In addition to specifying writecache settings on the command
line, they can also be set in lvm.conf, or in a profile file,
using the allocation/cache_settings/writecache config structure
shown below.
It's possible to prepare a number of different profile files in
the /etc/lvm/profile directory and specify the file name of the
profile when starting writecache.
Example
# cat <<EOF > /etc/lvm/profile/cache_writecache.profile
allocation {
cache_settings {
writecache {
high_watermark=60
writeback_jobs=1024
}
}
}
EOF
# lvcreate -an -L10G --name fast vg /dev/fast_ssd
# lvcreate --type writecache -L10G --name main --cachevol fast \
--metadataprofile cache_writecache vg /dev/slow_hdd
dm-cache with separate data and metadata LVs
Preferred way of using dm-cache is to place the cache metadata
and cache data on separate LVs. To do this, a "cache pool" is
created, which is a special LV that references two sub LVs, one
for data and one for metadata.
To create a cache pool of given data size and let lvm2 calculate
appropriate metadata size:
# lvcreate --type cache-pool -L DataSize -n fast vg
/dev/fast_ssd1
To create a cache pool from separate LV and let lvm2 calculate
appropriate cache metadata size:
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvconvert --type cache-pool vg/fast /dev/fast_ssd1
To create a cache pool from two separate LVs:
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvcreate -n fastmeta -L MetadataSize vg /dev/fast_ssd2
# lvconvert --type cache-pool --poolmetadata fastmeta vg/fast
Then use the cache pool LV to start caching the main LV:
# lvconvert --type cache --cachepool fast vg/main
A variation of the same procedure automatically creates a cache
pool when caching is started. To do this, use a standard LV as
the --cachepool (this will hold cache data), and use another
standard LV as the --poolmetadata (this will hold cache
metadata). LVM will create a cache pool LV from the two
specified LVs, and use the cache pool to start caching the main
LV.
# lvcreate -n fast -L DataSize vg /dev/fast_ssd1
# lvcreate -n fastmeta -L MetadataSize vg /dev/fast_ssd2
# lvconvert --type cache --cachepool fast \
--poolmetadata fastmeta vg/main
dm-cache cache modes
The default dm-cache cache mode is "writethrough". Writethrough
ensures that any data written will be stored both in the cache
and on the origin LV. The loss of a device associated with the
cache in this case would not mean the loss of any data.
A second cache mode is "writeback". Writeback delays writing
data blocks from the cache back to the origin LV. This mode will
increase performance, but the loss of a cache device can result
in lost data.
With the --cachemode option, the cache mode can be set when
caching is started, or changed on an LV that is already cached.
The current cache mode can be displayed with the cache_mode
reporting option:
lvs -o+cache_mode VG/LV
lvm.conf(5) allocation/cache_mode
defines the default cache mode.
# lvconvert --type cache --cachemode writethrough \
--cachepool fast vg/main
# lvconvert --type cache --cachemode writethrough \
--cachevol fast vg/main
dm-cache chunk size
The size of data blocks managed by dm-cache can be specified with
the --chunksize option when caching is started. The default unit
is KiB. The value must be a multiple of 32 KiB between 32 KiB
and 1 GiB. Cache chunks bigger then 512KiB shall be only used
when necessary.
Using a chunk size that is too large can result in wasteful use
of the cache, in which small reads and writes cause large
sections of an LV to be stored in the cache. It can also require
increasing migration threshold which defaults to 2048 sectors
(1 MiB). Lvm2 ensures migration threshold is at least 8 chunks in
size. This may in some cases result in very high bandwidth load
of transferring data between the cache LV and its cache origin
LV. However, choosing a chunk size that is too small can result
in more overhead trying to manage the numerous chunks that become
mapped into the cache. Overhead can include both excessive CPU
time searching for chunks, and excessive memory tracking chunks.
Command to display the chunk size:
lvs -o+chunksize VG/LV
lvm.conf(5) allocation/cache_pool_chunk_size
controls the default chunk size.
The default value is shown by:
lvmconfig --type default allocation/cache_pool_chunk_size
Checking migration threshold (in sectors) of running cached LV:
lvs -o+kernel_cache_settings VG/LV
dm-cache cache settings
To set dm-cache cache setting use:
--cachesettings 'option1=N option2=N ...'
To unset/drop cache setting and restore its default kernel value
use special keyword 'default' as option parameter:
--cachesettings 'option1=default option2=default ...'
dm-cache migration threshold cache setting
Migrating data between the origin and cache LV uses bandwidth.
The user can set a throttle to prevent more than a certain amount
of migration occurring at any one time. Currently dm-cache is
not taking any account of normal io traffic going to the devices.
User can set migration threshold via cache policy settings as
"migration_threshold=<#sectors>" to set the maximum number of
sectors being migrated, the default being 2048 sectors (1 MiB) or
8 cache chunks whichever of those two values is larger.
Command to set migration threshold to 2 MiB (4096 sectors):
lvcreate --cachesettings 'migration_threshold=4096' VG/LV
Command to display the migration threshold:
lvs -o+kernel_cache_settings,cache_settings VG/LV
lvs -o+chunksize VG/LV
Command to restore/revert to default value:
lvchange --cachesettings 'migration_threshold=default' VG/LV
dm-cache cache policy
The dm-cache subsystem has additional per-LV parameters: the
cache policy to use, and possibly tunable parameters for the
cache policy. Three policies are currently available: "smq" is
the default policy, "mq" is an older implementation, and
"cleaner" is used to force the cache to write back (flush) all
cached writes to the origin LV.
The older "mq" policy has a number of tunable parameters. The
defaults are chosen to be suitable for the majority of systems,
but in special circumstances, changing the settings can improve
performance. Newer kernels however alias this policy with "smq"
policy. Cache settings used to configure "mq" policy
[random_threshold, sequential_threshold,
discard_promote_adjustment, read_promote_adjustment,
write_promote_adjustment] are thus silently ignored also
performance matches "smq".
With the --cachepolicy and --cachesettings options, the cache
policy and settings can be set when caching is started, or
changed on an existing cached LV (both options can be used
together). The current cache policy and settings can be
displayed with the cache_policy and cache_settings reporting
options:
lvs -o+cache_policy,cache_settings VG/LV
Change the cache policy and settings of an existing LV.
# lvchange --cachepolicy mq --cachesettings \
'migration_threshold=2048 random_threshold=4' vg/main
lvm.conf(5) allocation/cache_policy
defines the default cache policy.
lvm.conf(5) allocation/cache_settings
defines the default cache settings.
dm-cache using metadata profiles
Cache pools allows to set a variety of options. Lots of these
settings can be specified in lvm.conf or profile settings. You
can prepare a number of different profiles in the
/etc/lvm/profile directory and just specify the metadata profile
file name when caching LV or creating cache-pool. Check the
output of lvmconfig --type default --withcomments for a detailed
description of all individual cache settings.
Example
# cat <<EOF > /etc/lvm/profile/cache_big_chunk.profile
allocation {
cache_pool_metadata_require_separate_pvs=0
cache_pool_chunk_size=512
cache_metadata_format=2
cache_mode="writethrough"
cache_policy="smq"
cache_settings {
smq {
migration_threshold=8192
}
}
}
EOF
# lvcreate --cache -L10G --metadataprofile cache_big_chunk vg/main \
/dev/fast_ssd
# lvcreate --cache -L10G vg/main --config \
'allocation/cache_pool_chunk_size=512' /dev/fast_ssd
dm-cache spare metadata LV
See lvmthin(7) for a description of the "pool metadata spare" LV.
The same concept is used for cache pools.
dm-cache metadata formats
There are two disk formats for dm-cache metadata. The metadata
format can be specified with --cachemetadataformat when caching
is started, and cannot be changed. Format 2 has better
performance; it is more compact, and stores dirty bits in a
separate btree, which improves the speed of shutting down the
cache. With auto, lvm selects the best option provided by the
current dm-cache kernel module.
RAID1 cache device
RAID1 can be used to create the fast LV holding the cache so that
it can tolerate a device failure. (When using dm-cache with
separate data and metadata LVs, each of the sub-LVs can use
RAID1.)
# lvcreate -n main -L Size vg /dev/slow
# lvcreate --type raid1 -m 1 -n fast -L Size vg /dev/ssd1 /dev/ssd2
# lvconvert --type cache --cachevol fast vg/main
dm-cache command shortcut
A single command can be used to cache main LV with automatic
creation of a cache-pool:
# lvcreate --cache --size CacheDataSize VG/LV [FastPVs]
or the longer variant
# lvcreate --type cache --size CacheDataSize \
--name NameCachePool VG/LV [FastPVs]
In this command, the specified LV already exists, and is the main
LV to be cached. The command creates a new cache pool with size
and given name or the name is automatically selected from a
sequence lvolX_cpool, using the optionally specified fast PV(s)
(typically an ssd). Then it attaches the new cache pool to the
existing main LV to begin caching.
(Note: ensure that the specified main LV is a standard LV. If a
cache pool LV is mistakenly specified, then the command does
something different.)
(Note: the type option is interpreted differently by this command
than by normal lvcreate commands in which --type specifies the
type of the newly created LV. In this case, an LV with type
cache-pool is being created, and the existing main LV is being
converted to type cache.)
lvm.conf(5), lvchange(8), lvcreate(8), lvdisplay(8), lvextend(8),
lvremove(8), lvrename(8), lvresize(8), lvs(8),
vgchange(8), vgmerge(8), vgreduce(8), vgsplit(8),
cache_check(8), cache_dump(8), cache_repair(8)
This page is part of the lvm2 (Logical Volume Manager 2) project.
Information about the project can be found at
⟨http://www.sourceware.org/lvm2/⟩. If you have a bug report for
this manual page, see ⟨https://github.com/lvmteam/lvm2/issues⟩.
This page was obtained from the project's upstream Git repository
⟨git://sourceware.org/git/lvm2.git⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-11.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
Red Hat, Inc LVM TOOLS 2.03.25(2)-git (2024-05-16) LVMCACHE(7)
Pages that refer to this page: pcp-dmcache(1), lvchange(8), lvconvert(8), lvcreate(8), lvdisplay(8), lvextend(8), lvm(8), lvmconfig(8), lvmdevices(8), lvmdiskscan(8), lvm-fullreport(8), lvm-lvpoll(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8), pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8), vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgconvert(8), vgcreate(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|