NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | EXAMPLES | AUTHORS | SEE ALSO | REPORTING BUGS | AVAILABILITY |
|
|
WIPEFS(8) System Administration WIPEFS(8)
wipefs - wipe a signature from a device
wipefs [options] device... wipefs [--backup] -o offset device... wipefs [--backup] -a device...
wipefs can erase filesystem, raid or partition-table signatures (magic strings) from the specified device to make the signatures invisible for libblkid. wipefs does not erase the filesystem itself nor any other data from the device. When used without any options, wipefs lists all visible filesystems and the offsets of their basic signatures. The default output is subject to change. So whenever possible, you should avoid using default outputs in your scripts. Always explicitly define expected columns by using --output columns-list in environments where a stable output is required. wipefs calls the BLKRRPART ioctl when it has erased a partition-table signature to inform the kernel about the change. The ioctl is called as the last step and when all specified signatures from all specified devices are already erased. This feature can be used to wipe content on partition devices as well as a partition table on a disk device, for example by wipefs -a /dev/sdc1 /dev/sdc2 /dev/sdc. Note that some filesystems and some partition tables store more magic strings on the device (e.g., FAT, ZFS, GPT). The wipefs command (since v2.31) lists all the offsets where magic strings have been detected. When option -a is used, all magic strings that are visible for libblkid(3) are erased. In this case the wipefs scans the device again after each modification (erase) until no magic string is found. Note that by default wipefs does not erase nested partition tables on non-whole disk devices. For this the option --force is required.
-a, --all Erase all available signatures. The set of erased signatures can be restricted with the -t option. -b, --backup[=dir] Create a signature backup to the file wipefs-<devname>-<offset>.bak in $HOME or the directory specified as the optional argument. For more details see the EXAMPLE section. -f, --force Force erasure, even if the filesystem is mounted. This is required in order to erase a partition-table signature on a block device. -J, --json Use JSON output format. --lock[=mode] Use exclusive BSD lock for device or file it operates. The optional argument mode can be yes, no (or 1 and 0) or nonblock. If the mode argument is omitted, it defaults to "yes". This option overwrites environment variable $LOCK_BLOCK_DEVICE. The default is not to use any lock at all, but it’s recommended to avoid collisions with udevd or other tools. -i, --noheadings Do not print a header line. -O, --output list Specify which output columns to print. Use --help to get a list of all supported columns. -n, --no-act Causes everything to be done except for the write(2) call. -o, --offset offset Specify the location (in bytes) of the signature which should be erased from the device. The offset number may include a "0x" prefix; then the number will be interpreted as a hex value. It is possible to specify multiple -o options. The offset argument may be followed by the multiplicative suffixes KiB (=1024), MiB (=1024*1024), and so on for GiB, TiB, PiB, EiB, ZiB and YiB (the "iB" is optional, e.g., "K" has the same meaning as "KiB"), or the suffixes KB (=1000), MB (=1000*1000), and so on for GB, TB, PB, EB, ZB and YB. -p, --parsable Print out in parsable instead of printable format. Encode all potentially unsafe characters of a string to the corresponding hex value prefixed by '\x'. -q, --quiet Suppress any messages after a successful signature wipe. -t, --types list Limit the set of printed or erased signatures. More than one type may be specified in a comma-separated list. The list or individual types can be prefixed with 'no' to specify the types on which no action should be taken. For more details see mount(8). -h, --help Display help text and exit. -V, --version Print version and exit.
LIBBLKID_DEBUG=all enables libblkid(3) debug output. LOCK_BLOCK_DEVICE=<mode> use exclusive BSD lock. The mode is "1" or "0". See --lock for more details.
wipefs /dev/sda* Prints information about sda and all partitions on sda. wipefs --all --backup /dev/sdb Erases all signatures from the device /dev/sdb and creates a signature backup file ~/wipefs-sdb-<offset>.bak for each signature. dd if=~/wipefs-sdb-0x00000438.bak of=/dev/sdb seek=$((0x00000438)) bs=1 conv=notrunc Restores an ext2 signature from the backup file ~/wipefs-sdb-0x00000438.bak.
Karel Zak <[email protected]>
blkid(8), findfs(8)
For bug reports, use the issue tracker at https://github.com/util-linux/util-linux/issues.
The wipefs command is part of the util-linux package which can be
downloaded from Linux Kernel Archive
<https://www.kernel.org/pub/linux/utils/util-linux/>. This page
is part of the util-linux (a random collection of Linux
utilities) project. Information about the project can be found at
⟨https://www.kernel.org/pub/linux/utils/util-linux/⟩. If you have
a bug report for this manual page, send it to
[email protected]. This page was obtained from the
project's upstream Git repository
⟨git://git.kernel.org/pub/scm/utils/util-linux/util-linux.git⟩ on
2024-06-14. (At that time, the date of the most recent commit
that was found in the repository was 2024-06-10.) If you discover
any rendering problems in this HTML version of the page, or you
believe there is a better or more up-to-date source for the page,
or you have corrections or improvements to the information in
this COLOPHON (which is not part of the original manual page),
send a mail to [email protected]
util-linux 2.41.devel-537-e... 2024-06-13 WIPEFS(8)
Pages that refer to this page: systemd.mount(5), systemd.swap(5), blkid(8), btrfs-device(8), cfdisk(8), cryptsetup(8), fdisk(8), mkfs.btrfs(8), sfdisk(8)