ldapmodify(1) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | INPUT FORMAT | EXAMPLES | DIAGNOSTICS | SEE ALSO | AUTHOR | ACKNOWLEDGEMENTS | COLOPHON

LDAPMODIFY(1)            General Commands Manual           LDAPMODIFY(1)

NAME         top

       ldapmodify, ldapadd - LDAP modify entry and LDAP add entry tools

SYNOPSIS         top

       ldapmodify [-V[V]] [-d debuglevel] [-n] [-v] [-a] [-c] [-f file]
       [-i time] [-j lineno] [-S file] [-M[M]] [-x] [-D binddn] [-W]
       [-w passwd] [-y passwdfile] [-H ldapuri] [-P {2|3}]
       [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]]
       [-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm]
       [-X authzid] [-Y mech] [-Z[Z]]

       ldapadd [-V[V]] [-d debuglevel] [-n] [-v] [-c] [-f file]
       [-i time] [-j lineno] [-S file] [-M[M]] [-x] [-D binddn] [-W]
       [-w passwd] [-y passwdfile] [-H ldapuri] [-P {2|3}]
       [-e [!]ext[=extparam]] [-E [!]ext[=extparam]] [-o opt[=optparam]]
       [-O security-properties] [-I] [-Q] [-N] [-U authcid] [-R realm]
       [-X authzid] [-Y mech] [-Z[Z]]

DESCRIPTION         top

       ldapmodify is a shell-accessible interface to the
       ldap_add_ext(3), ldap_modify_ext(3), ldap_delete_ext(3) and
       ldap_rename(3).  library calls.  ldapadd is implemented as a hard
       link to the ldapmodify tool.  When invoked as ldapadd the -a (add
       new entry) flag is turned on automatically.

       ldapmodify opens a connection to an LDAP server, binds, and
       modifies or adds entries.  The entry information is read from
       standard input or from file through the use of the -f option.

OPTIONS         top

       -V[V]  Print version info.  If -VV is given, only the version
              information is printed.

       -d debuglevel
              Set the LDAP debugging level to debuglevel.  ldapmodify
              must be compiled with LDAP_DEBUG defined for this option
              to have any effect.

       -n     Show what would be done, but don't actually modify
              entries.  Useful for debugging in conjunction with -v.

       -v     Use verbose mode, with many diagnostics written to
              standard output.

       -a     Add new entries.  The default for ldapmodify is to modify
              existing entries.  If invoked as ldapadd, this flag is
              always set.

       -c     Continuous operation mode.  Errors are reported, but
              ldapmodify will continue with modifications.  The default
              is to exit after reporting an error.

       -f file
              Read the entry modification information from file instead
              of from standard input.

       -i time
              Wait time microseconds before issuing an operation.

       -j lineno
              Jump to the specified line number in the LDIF file before
              processing any entries.  This allows a load that was
              aborted due to errors in the input LDIF to be resumed
              after the errors are corrected.

       -S file
              Add or change records which were skipped due to an error
              are written to file and the error message returned by the
              server is added as a comment. Most useful in conjunction
              with -c.

       -M[M]  Enable manage DSA IT control.  -MM makes control critical.

       -x     Use simple authentication instead of SASL.

       -D binddn
              Use the Distinguished Name binddn to bind to the LDAP
              directory.  For SASL binds, the server is expected to
              ignore this value.

       -W     Prompt for simple authentication.  This is used instead of
              specifying the password on the command line.

       -w passwd
              Use passwd as the password for simple authentication.

       -y passwdfile
              Use complete contents of passwdfile as the password for
              simple authentication.

       -H ldapuri
              Specify URI(s) referring to the ldap server(s); only the
              protocol/host/port fields are allowed; a list of URI,
              separated by whitespace or commas is expected.

       -P {2|3}
              Specify the LDAP protocol version to use.

       -e [!]ext[=extparam]

       -E [!]ext[=extparam]

              Specify general extensions with -e and modify extensions
              with -E.  ´!´ indicates criticality.

              General extensions:
                [!]assert=<filter>    (an RFC 4515 Filter)
                !authzid=<authzid>    ("dn:<dn>" or "u:<user>")
                [!]bauthzid           (RFC 3829 authzid control)
                [!]chaining[=<resolve>[/<cont>]]
                [!]manageDSAit
                [!]noop
                ppolicy
                [!]postread[=<attrs>] (a comma-separated attribute list)
                [!]preread[=<attrs>]  (a comma-separated attribute list)
                [!]relax
                sessiontracking[=<username>]
                abandon,cancel,ignore (SIGINT sends abandon/cancel,
                or ignores response; if critical, doesn't wait for SIGINT.
                not really controls)

              Modify extensions:
                [!]txn[=abort|commit]

       -o opt[=optparam]]

              Specify any ldap.conf(5) option or one of the following:
                nettimeout=<timeout>  (in seconds, or "none" or "max")
                ldif_wrap=<width>     (in columns, or "no" for no wrapping)

       -O security-properties
              Specify SASL security properties.

       -I     Enable SASL Interactive mode.  Always prompt.  Default is
              to prompt only as needed.

       -Q     Enable SASL Quiet mode.  Never prompt.

       -N     Do not use reverse DNS to canonicalize SASL host name.

       -U authcid
              Specify the authentication ID for SASL bind. The form of
              the ID depends on the actual SASL mechanism used.

       -R realm
              Specify the realm of authentication ID for SASL bind. The
              form of the realm depends on the actual SASL mechanism
              used.

       -X authzid
              Specify the requested authorization ID for SASL bind.
              authzid must be one of the following formats:
              dn:<distinguished name> or u:<username>

       -Y mech
              Specify the SASL mechanism to be used for authentication.
              If it's not specified, the program will choose the best
              mechanism the server knows.

       -Z[Z]  Issue StartTLS (Transport Layer Security) extended
              operation. If you use -ZZ, the command will require the
              operation to be successful.

INPUT FORMAT         top

       The contents of file (or standard input if no -f flag is given on
       the command line) must conform to the format defined in ldif(5)
       (LDIF as defined in RFC 2849).

EXAMPLES         top

       Assuming that the file /tmp/entrymods exists and has the
       contents:

           dn: cn=Modify Me,dc=example,dc=com
           changetype: modify
           replace: mail
           mail: [email protected]
           -
           add: title
           title: Grand Poobah
           -
           add: jpegPhoto
           jpegPhoto:< file:///tmp/modme.jpeg
           -
           delete: description
           -

       the command:

           ldapmodify -f /tmp/entrymods

       will replace the contents of the "Modify Me" entry's mail
       attribute with the value "[email protected]", add a title of
       "Grand Poobah", and the contents of the file "/tmp/modme.jpeg" as
       a jpegPhoto, and completely remove the description attribute.

       Assuming that the file /tmp/newentry exists and has the contents:

           dn: cn=Barbara Jensen,dc=example,dc=com
           objectClass: person
           cn: Barbara Jensen
           cn: Babs Jensen
           sn: Jensen
           title: the world's most famous mythical manager
           mail: [email protected]
           uid: bjensen

       the command:

           ldapadd -f /tmp/newentry

       will add a new entry for Babs Jensen, using the values from the
       file /tmp/newentry.

       Assuming that the file /tmp/entrymods exists and has the
       contents:

           dn: cn=Barbara Jensen,dc=example,dc=com
           changetype: delete

       the command:

           ldapmodify -f /tmp/entrymods

       will remove Babs Jensen's entry.

DIAGNOSTICS         top

       Exit status is zero if no errors occur.  Errors result in a non-
       zero exit status and a diagnostic message being written to
       standard error.

SEE ALSO         top

       ldapadd(1), ldapdelete(1), ldapmodrdn(1), ldapsearch(1),
       ldap.conf(5), ldap(3), ldap_add_ext(3), ldap_delete_ext(3),
       ldap_modify_ext(3), ldap_modrdn_ext(3), ldif(5).

AUTHOR         top

       The OpenLDAP Project <http://www.openldap.org/>

ACKNOWLEDGEMENTS         top

       OpenLDAP Software is developed and maintained by The OpenLDAP
       Project <http://www.openldap.org/>.  OpenLDAP Software is derived
       from the University of Michigan LDAP 3.3 Release.

COLOPHON         top

       This page is part of the OpenLDAP (an open source implementation
       of the Lightweight Directory Access Protocol) project.
       Information about the project can be found at 
       ⟨http://www.openldap.org/⟩.  If you have a bug report for this
       manual page, see ⟨http://www.openldap.org/its/⟩.  This page was
       obtained from the project's upstream Git repository
       ⟨https://git.openldap.org/openldap/openldap.git⟩ on 2024-06-14.
       (At that time, the date of the most recent commit that was found
       in the repository was 2024-06-13.)  If you discover any rendering
       problems in this HTML version of the page, or you believe there
       is a better or more up-to-date source for the page, or you have
       corrections or improvements to the information in this COLOPHON
       (which is not part of the original manual page), send a mail to
       [email protected]

OpenLDAP LDVERSION             RELEASEDATE                 LDAPMODIFY(1)

Pages that refer to this page: ldapdelete(1)ldapmodify(1)ldapmodrdn(1)ldapsearch(1)ldif(5)slapadd(8)slapcat(8)slapindex(8)slapmodify(8)slappasswd(8)