modprobe(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | OPTIONS | ENVIRONMENT | COPYRIGHT | SEE ALSO | AUTHORS | COLOPHON

MODPROBE(8)                     modprobe                     MODPROBE(8)

NAME         top

       modprobe - Add and remove modules from the Linux Kernel

SYNOPSIS         top


       modprobe [-v] [-V] [-C config-file] [-n] [-i] [-q] [-b]
                [modulename] [module parameters...]

       modprobe [-r] [-v] [-n] [-i] [modulename...]

       modprobe [-c]

       modprobe [--dump-modversions] [filename]

DESCRIPTION         top

       modprobe intelligently adds or removes a module from the Linux
       kernel: note that for convenience, there is no difference between
       _ and - in module names (automatic underscore conversion is
       performed).  modprobe looks in the module directory
       /lib/modules/`uname -r` for all the modules and other files,
       except for the optional configuration files in the
       /etc/modprobe.d directory (see modprobe.d(5)).  modprobe will
       also use module options specified on the kernel command line in
       the form of <module>.<option> and blacklists in the form of
       modprobe.blacklist=<module>.

       Note that unlike in 2.4 series Linux kernels (which are not
       supported by this tool) this version of modprobe does not do
       anything to the module itself: the work of resolving symbols and
       understanding parameters is done inside the kernel. So module
       failure is sometimes accompanied by a kernel message: see
       dmesg(8).

       modprobe expects an up-to-date modules.dep.bin file as generated
       by the corresponding depmod utility shipped along with modprobe
       (see depmod(8)). This file lists what other modules each module
       needs (if any), and modprobe uses this to add or remove these
       dependencies automatically.

       If any arguments are given after the modulename, they are passed
       to the kernel (in addition to any options listed in the
       configuration file).

       When loading modules, modulename can also be a path to the
       module. If the path is relative, it must explicitly start with
       "./". Note that this may fail when using a path to a module with
       dependencies not matching the installed depmod database.

OPTIONS         top

       -a, --all
           Insert all module names on the command line.

       -b, --use-blacklist
           This option causes modprobe to apply the blacklist commands
           in the configuration files (if any) to module names as well.
           It is usually used by udev(7).

       -C, --config
           This option overrides the default configuration directory
           (/etc/modprobe.d).

           This option is passed through install or remove commands to
           other modprobe commands in the MODPROBE_OPTIONS environment
           variable.

       -c, --showconfig
           Dump out the effective configuration from the config
           directory and exit.

       --dump-modversions
           Print out a list of module versioning information required by
           a module. This option is commonly used by distributions in
           order to package up a Linux kernel module using module
           versioning deps.

       -d, --dirname
           Root directory for modules, / by default.

       --first-time
           Normally, modprobe will succeed (and do nothing) if told to
           insert a module which is already present or to remove a
           module which isn't present. This is ideal for simple scripts;
           however, more complicated scripts often want to know whether
           modprobe really did something: this option makes modprobe
           fail in the case that it actually didn't do anything.

       --force-vermagic
           Every module contains a small string containing important
           information, such as the kernel and compiler versions. If a
           module fails to load and the kernel complains that the
           "version magic" doesn't match, you can use this option to
           remove it. Naturally, this check is there for your
           protection, so using this option is dangerous unless you know
           what you're doing.

           This applies to any modules inserted: both the module (or
           alias) on the command line and any modules on which it
           depends.

       --force-modversion
           When modules are compiled with CONFIG_MODVERSIONS set, a
           section detailing the versions of every interfaced used by
           (or supplied by) the module is created. If a module fails to
           load and the kernel complains that the module disagrees about
           a version of some interface, you can use "--force-modversion"
           to remove the version information altogether. Naturally, this
           check is there for your protection, so using this option is
           dangerous unless you know what you're doing.

           This applies any modules inserted: both the module (or alias)
           on the command line and any modules on which it depends.

       -f, --force
           Try to strip any versioning information from the module which
           might otherwise stop it from loading: this is the same as
           using both --force-vermagic and --force-modversion.
           Naturally, these checks are there for your protection, so
           using this option is dangerous unless you know what you are
           doing.

           This applies to any modules inserted: both the module (or
           alias) on the command line and any modules it on which it
           depends.

       -i, --ignore-install, --ignore-remove
           This option causes modprobe to ignore install and remove
           commands in the configuration file (if any) for the module
           specified on the command line (any dependent modules are
           still subject to commands set for them in the configuration
           file). Both install and remove commands will currently be
           ignored when this option is used regardless of whether the
           request was more specifically made with only one or other
           (and not both) of --ignore-install or --ignore-remove. See
           modprobe.d(5).

       -n, --dry-run, --show
           This option does everything but actually insert or delete the
           modules (or run the install or remove commands). Combined
           with -v, it is useful for debugging problems. For historical
           reasons both --dry-run and --show actually mean the same
           thing and are interchangeable.

       -q, --quiet
           With this flag, modprobe won't print an error message if you
           try to remove or insert a module it can't find (and isn't an
           alias or install/remove command). However, it will still
           return with a non-zero exit status. The kernel uses this to
           opportunistically probe for modules which might exist using
           request_module.

       -R, --resolve-alias
           Print all module names matching an alias. This can be useful
           for debugging module alias problems.

       -r, --remove
           This option causes modprobe to remove rather than insert a
           module. If the modules it depends on are also unused,
           modprobe will try to remove them too. Unlike insertion, more
           than one module can be specified on the command line (it does
           not make sense to specify module parameters when removing
           modules).

           There is usually no reason to remove modules, but some buggy
           modules require it. Your distribution kernel may not have
           been built to support removal of modules at all.

       -w, --wait=TIMEOUT_MSEC
           This option causes modprobe -r to continue trying to remove a
           module if it fails due to the module being busy, i.e. its
           refcount is not 0 at the time the call is made. Modprobe
           tries to remove the module with an incremental sleep time
           between each tentative up until the maximum wait time in
           milliseconds passed in this option.

       -S, --set-version
           Set the kernel version, rather than using uname(2) to decide
           on the kernel version (which dictates where to find the
           modules).

       --show-depends
           List the dependencies of a module (or alias), including the
           module itself. This produces a (possibly empty) set of module
           filenames, one per line, each starting with "insmod" and is
           typically used by distributions to determine which modules to
           include when generating initrd/initramfs images.  Install
           commands which apply are shown prefixed by "install". It does
           not run any of the install commands. Note that modinfo(8) can
           be used to extract dependencies of a module from the module
           itself, but knows nothing of aliases or install commands.

       -s, --syslog
           This option causes any error messages to go through the
           syslog mechanism (as LOG_DAEMON with level LOG_NOTICE) rather
           than to standard error. This is also automatically enabled
           when stderr is unavailable.

           This option is passed through install or remove commands to
           other modprobe commands in the MODPROBE_OPTIONS environment
           variable.

       -V, --version
           Show version of program and exit.

       -v, --verbose
           Print messages about what the program is doing. Usually
           modprobe only prints messages if something goes wrong.

           This option is passed through install or remove commands to
           other modprobe commands in the MODPROBE_OPTIONS environment
           variable.

ENVIRONMENT         top

       The MODPROBE_OPTIONS environment variable can also be used to
       pass arguments to modprobe.

COPYRIGHT         top

       This manual page originally Copyright 2002, Rusty Russell, IBM
       Corporation. Maintained by Jon Masters and others.

SEE ALSO         top

       modprobe.d(5), insmod(8), rmmod(8), lsmod(8), modinfo(8)
       depmod(8)

AUTHORS         top

       Jon Masters <[email protected]>
           Developer

       Robby Workman <[email protected]>
           Developer

       Lucas De Marchi <[email protected]>
           Developer

COLOPHON         top

       This page is part of the kmod (userspace tools for managing
       kernel modules) project.  Information about the project can be
       found at [unknown -- if you know, please contact man-
       [email protected]] If you have a bug report for this manual page,
       send it to [email protected].  This page was obtained
       from the project's upstream Git repository
       ⟨git://git.kernel.org/pub/scm/utils/kernel/kmod/kmod.git⟩ on
       2024-06-14.  (At that time, the date of the most recent commit
       that was found in the repository was 2024-06-11.)  If you
       discover any rendering problems in this HTML version of the page,
       or you believe there is a better or more up-to-date source for
       the page, or you have corrections or improvements to the
       information in this COLOPHON (which is not part of the original
       manual page), send a mail to [email protected]

kmod                           06/14/2024                    MODPROBE(8)

Pages that refer to this page: delete_module(2)init_module(2)sk98lin(4)modprobe.d(5)modules.dep(5)modules-load.d(5)sysctl.d(5)depmod(8)insmod(8)kmod(8)lsmod(8)modinfo(8)rmmod(8)