devlink-rate(8) — Linux manual page

NAME | SYNOPSIS | DESCRIPTION | EXAMPLES | SEE ALSO | AUTHOR | COLOPHON

DEVLINK-RATE(8)                   Linux                  DEVLINK-RATE(8)

NAME         top

       devlink-rate - devlink rate management

SYNOPSIS         top

       devlink [ OPTIONS ] port function rate  { COMMAND | help }

       OPTIONS := { -j[son] | -p[retty] | -i[ec] }

       devlink port function rate show [ { DEV/PORT_INDEX |
               DEV/NODE_NAME } ]

       devlink port function rate set { DEV/PORT_INDEX | DEV/NODE_NAME }
               [ tx_share VALUE ] [ tx_max VALUE ] [ tx_priority N ] [
               tx_weight N ] [ { parent NODE_NAME | noparent } ]

       devlink port function rate add DEV/NODE_NAME [ tx_share VALUE ] [
               tx_max VALUE ] [ tx_priority N ] [ tx_weight N ] [ {
               parent NODE_NAME | noparent } ]

       devlink port function rate del DEV/NODE_NAME

       devlink port function rate help

DESCRIPTION         top

   devlink port function rate show - display rate objects.
       Displays specified rate object or, if not specified, all rate
       objects. Rate object can be presented by one of the two types:

       leaf    Represents a single devlink port; created/destroyed by
               the driver and bound to the devlink port. As example,
               some driver may create leaf rate object for every devlink
               port associated with VF. Since leaf have 1to1 mapping to
               it's devlink port, in user space it is referred as
               corresponding devlink port DEV/PORT_INDEX;

       node    Represents a group of rate objects; created/deleted by
               the user (see command below) and bound to the devlink
               device rather then to the devlink port. In userspace it
               is referred as DEV/NODE_NAME, where node name can be any,
               except decimal number, to avoid collisions with leafs.

       Command output show rate object identifier, it's type and rate
       values along with parent node name. Rate values printed in SI
       units which are more suitable to represent specific value. To
       print values in IEC units -i switch is used. JSON (-j) output
       always print rate values in bytes per second. Zero rate values
       means "unlimited" rates and omitted in output, as well as parent
       node name.

   devlink port function rate set - set rate object parameters.
       Allows set rate object's parameters. If any parameter specified
       multiple times the last occurrence is used.

       DEV/PORT_INDEX - specifies devlink leaf rate object.
       DEV/NODE_NAME - specifies devlink node rate object.

       tx_share VALUE - specifies minimal tx rate value shared among all
       rate objects. If rate object is a part of some rate group, then
       this value shared with rate objects of this rate group.

       tx_max VALUE - specifies maximum tx rate value.

       tx_priority N - allows for usage of strict priority arbiter among
       siblings. This arbitration scheme attempts to schedule nodes
       based on their priority as long as the nodes remain within their
       bandwidth limit. The higher the priority the higher the
       probability that the node will get selected for scheduling.

       tx_weight N - allows for usage of Weighted Fair Queuing
       arbitration scheme among siblings.  This arbitration scheme can
       be used simultaneously with the strict priority.  As a node is
       configured with a higher rate it gets more BW relative to it's
       siblings. Values are relative like a percentage points, they
       basically tell how much BW should node take relative to it's
       siblings.

       VALUE   These parameter accept a floating point number, possibly
               followed by either a unit (both SI and IEC units
               supported).

               bit or a bare number
                      Bits per second

               kbit   Kilobits per second

               mbit   Megabits per second

               gbit   Gigabits per second

               tbit   Terabits per second

               bps    Bytes per second

               kbps   Kilobytes per second

               mbps   Megabytes per second

               gbps   Gigabytes per second

               tbps   Terabytes per second

               To specify in IEC units, replace the SI prefix (k-, m-,
               g-, t-) with IEC prefix (ki-, mi-, gi- and ti-)
               respectively. Input is case-insensitive.

       N       These parameter accept integer meaning weight or priority
               of a node.

       parent NODE_NAME | noparent - set rate object parent to existing
       node with name NODE_NAME or unset parent. Rate limits of the
       parent node applied to all it's children. Actual behaviour is
       details of driver's implementation. Setting parent to empty ("")
       name due to the kernel logic treated as parent unset.

   devlink port function rate add - create node rate object with
       specified parameters.
       Creates rate object of type node and sets parameters. Parameters
       same as for the "set" command.

       DEV/NODE_NAME - specifies the devlink node rate object to create.

   devlink port function rate del - delete node rate object
       Delete specified devlink node rate object. Node can't be deleted
       if there is any child, user must explicitly unset the parent.

       DEV/NODE_NAME - specifies devlink node rate object to delete.

   devlink port function rate help - display usage information
       Display devlink rate usage information

EXAMPLES         top

       * Display all rate objects:

           # devlink port function rate show
           pci/0000:03:00.0/1 type leaf parent some_group
           pci/0000:03:00.0/2 type leaf tx_share 12Mbit
           pci/0000:03:00.0/some_group type node tx_share 1Gbps tx_max
           5Gbps

       * Display leaf rate object bound to the 1st devlink port of the
       pci/0000:03:00.0 device:

           # devlink port function rate show pci/0000:03:00.0/1
           pci/0000:03:00.0/1 type leaf

       * Display leaf rate object rate values using IEC units:

           # devlink -i port function rate show pci/0000:03:00.0/2
           pci/0000:03:00.0/2 type leaf 11718Kibit

       * Display node rate object with name some_group of the
       pci/0000:03:00.0 device:

           # devlink port function rate show pci/0000:03:00.0/some_group
           pci/0000:03:00.0/some_group type node

       * Display pci/0000:03:00.0/2 leaf rate object as pretty JSON
       output:

           # devlink -jp port function rate show pci/0000:03:00.0/2
           {
               "rate": {
                   "pci/0000:03:00.0/2": {
                       "type": "leaf",
                       "tx_share": 1500000
                   }
               }
           }

       * Create node rate object with name "1st_group" on
       pci/0000:03:00.0 device:

           # devlink port function rate add pci/0000:03:00.0/1st_group

       * Create node rate object with specified parameters:

           # devlink port function rate add pci/0000:03:00.0/2nd_group \
                tx_share 10Mbit tx_max 30Mbit parent 1st_group

       * Set parameters to the specified leaf rate object:

           # devlink port function rate set pci/0000:03:00.0/1 \
                tx_share 2Mbit tx_max 10Mbit

       * Set leaf's parent to "1st_group":

           # devlink port function rate set pci/0000:03:00.0/1 parent
           1st_group

       * Unset leaf's parent:

           # devlink port function rate set pci/0000:03:00.0/1 noparent

       * Delete node rate object:

           # devlink port function rate del pci/0000:03:00.0/2nd_group

SEE ALSO         top

       devlink(8), devlink-port(8)

AUTHOR         top

       Dmytro Linkin <[email protected]>

COLOPHON         top

       This page is part of the iproute2 (utilities for controlling
       TCP/IP networking and traffic) project.  Information about the
       project can be found at 
       ⟨http://www.linuxfoundation.org/collaborate/workgroups/networking/iproute2⟩.
       If you have a bug report for this manual page, send it to
       [email protected], [email protected].  This page was
       obtained from the project's upstream Git repository
       ⟨https://git.kernel.org/pub/scm/network/iproute2/iproute2.git⟩ on
       2024-06-14.  (At that time, the date of the most recent commit
       that was found in the repository was 2024-06-11.)  If you
       discover any rendering problems in this HTML version of the page,
       or you believe there is a better or more up-to-date source for
       the page, or you have corrections or improvements to the
       information in this COLOPHON (which is not part of the original
       manual page), send a mail to [email protected]

iproute2                       12 Mar 2021               DEVLINK-RATE(8)

Pages that refer to this page: devlink-port(8)