|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | HIERARCHICAL QUOTA GROUP CONCEPTS | SUBCOMMAND | EXIT STATUS | AVAILABILITY | SEE ALSO | COLOPHON |
|
|
|
BTRFS-QUOTA(8) Btrfs Manual BTRFS-QUOTA(8)
btrfs-quota - control the global quota status of a btrfs
filesystem
btrfs quota <subcommand> <args>
The commands under btrfs quota are used to affect the global
status of quotas of a btrfs filesystem. The quota groups
(qgroups) are managed by the subcommand btrfs qgroup(8).
Note
Qgroups are different than the traditional user quotas and
designed to track shared and exclusive data per-subvolume.
Please refer to the section HIERARCHICAL QUOTA GROUP CONCEPTS
for a detailed description.
PERFORMANCE IMPLICATIONS
When quotas are activated, they affect all extent processing,
which takes a performance hit. Activation of qgroups is not
recommended unless the user intends to actually use them.
STABILITY STATUS
The qgroup implementation has turned out to be quite difficult as
it affects the core of the filesystem operation. Qgroup users
have hit various corner cases over time, such as incorrect
accounting or system instability. The situation is gradually
improving and issues found and fixed.
The concept of quota has a long-standing tradition in the Unix
world. Ever since computers allow multiple users to work
simultaneously in one filesystem, there is the need to prevent
one user from using up the entire space. Every user should get
his fair share of the available resources.
In case of files, the solution is quite straightforward. Each
file has an owner recorded along with it, and it has a size.
Traditional quota just restricts the total size of all files that
are owned by a user. The concept is quite flexible: if a user
hits his quota limit, the administrator can raise it on the fly.
On the other hand, the traditional approach has only a poor
solution to restrict directories. At installation time, the
harddisk can be partitioned so that every directory (eg. /usr,
/var/, ...) that needs a limit gets its own partition. The
obvious problem is that those limits cannot be changed without a
reinstallation. The btrfs subvolume feature builds a bridge.
Subvolumes correspond in many ways to partitions, as every
subvolume looks like its own filesystem. With subvolume quota, it
is now possible to restrict each subvolume like a partition, but
keep the flexibility of quota. The space for each subvolume can
be expanded or restricted on the fly.
As subvolumes are the basis for snapshots, interesting questions
arise as to how to account used space in the presence of
snapshots. If you have a file shared between a subvolume and a
snapshot, whom to account the file to? The creator? Both? What if
the file gets modified in the snapshot, should only these changes
be accounted to it? But wait, both the snapshot and the subvolume
belong to the same user home. I just want to limit the total
space used by both! But somebody else might not want to charge
the snapshots to the users.
Btrfs subvolume quota solves these problems by introducing groups
of subvolumes and let the user put limits on them. It is even
possible to have groups of groups. In the following, we refer to
them as qgroups.
Each qgroup primarily tracks two numbers, the amount of total
referenced space and the amount of exclusively referenced space.
referenced
space is the amount of data that can be reached from any of
the subvolumes contained in the qgroup, while
exclusive
is the amount of data where all references to this data can
be reached from within this qgroup.
SUBVOLUME QUOTA GROUPS
The basic notion of the Subvolume Quota feature is the quota
group, short qgroup. Qgroups are notated as level/id, eg. the
qgroup 3/2 is a qgroup of level 3. For level 0, the leading 0/
can be omitted. Qgroups of level 0 get created automatically when
a subvolume/snapshot gets created. The ID of the qgroup
corresponds to the ID of the subvolume, so 0/5 is the qgroup for
the root subvolume. For the btrfs qgroup command, the path to the
subvolume can also be used instead of 0/ID. For all higher
levels, the ID can be chosen freely.
Each qgroup can contain a set of lower level qgroups, thus
creating a hierarchy of qgroups. Figure 1 shows an example qgroup
tree.
+---+
|2/1|
+---+
/ \
+---+/ \+---+
|1/1| |1/2|
+---+ +---+
/ \ / \
+---+/ \+---+/ \+---+
qgroups |0/1| |0/2| |0/3|
+-+-+ +---+ +---+
| / \ / \
| / \ / \
| / \ / \
extents 1 2 3 4
Figure1: Sample qgroup hierarchy
At the bottom, some extents are depicted showing which qgroups
reference which extents. It is important to understand the notion
of referenced vs exclusive. In the example, qgroup 0/2 references
extents 2 and 3, while 1/2 references extents 2-4, 2/1 references
all extents.
On the other hand, extent 1 is exclusive to 0/1, extent 2 is
exclusive to 0/2, while extent 3 is neither exclusive to 0/2 nor
to 0/3. But because both references can be reached from 1/2,
extent 3 is exclusive to 1/2. All extents are exclusive to 2/1.
So exclusive does not mean there is no other way to reach the
extent, but it does mean that if you delete all subvolumes
contained in a qgroup, the extent will get deleted.
Exclusive of a qgroup conveys the useful information how much
space will be freed in case all subvolumes of the qgroup get
deleted.
All data extents are accounted this way. Metadata that belongs to
a specific subvolume (i.e. its filesystem tree) is also
accounted. Checksums and extent allocation information are not
accounted.
In turn, the referenced count of a qgroup can be limited. All
writes beyond this limit will lead to a Quota Exceeded error.
INHERITANCE
Things get a bit more complicated when new subvolumes or
snapshots are created. The case of (empty) subvolumes is still
quite easy. If a subvolume should be part of a qgroup, it has to
be added to the qgroup at creation time. To add it at a later
time, it would be necessary to at least rescan the full subvolume
for a proper accounting.
Creation of a snapshot is the hard case. Obviously, the snapshot
will reference the exact amount of space as its source, and both
source and destination now have an exclusive count of 0 (the
filesystem nodesize to be precise, as the roots of the trees are
not shared). But what about qgroups of higher levels? If the
qgroup contains both the source and the destination, nothing
changes. If the qgroup contains only the source, it might lose
some exclusive.
But how much? The tempting answer is, subtract all exclusive of
the source from the qgroup, but that is wrong, or at least not
enough. There could have been an extent that is referenced from
the source and another subvolume from that qgroup. This extent
would have been exclusive to the qgroup, but not to the source
subvolume. With the creation of the snapshot, the qgroup would
also lose this extent from its exclusive set.
So how can this problem be solved? In the instant the snapshot
gets created, we already have to know the correct exclusive
count. We need to have a second qgroup that contains all the
subvolumes as the first qgroup, except the subvolume we want to
snapshot. The moment we create the snapshot, the exclusive count
from the second qgroup needs to be copied to the first qgroup, as
it represents the correct value. The second qgroup is called a
tracking qgroup. It is only there in case a snapshot is needed.
USE CASES
Below are some usecases that do not mean to be extensive. You can
find your own way how to integrate qgroups.
SINGLE-USER MACHINE
Replacement for partitions
The simplest use case is to use qgroups as simple replacement
for partitions. Btrfs takes the disk as a whole, and /, /usr,
/var, etc. are created as subvolumes. As each subvolume gets
it own qgroup automatically, they can simply be restricted.
No hierarchy is needed for that.
Track usage of snapshots
When a snapshot is taken, a qgroup for it will automatically
be created with the correct values. Referenced will show how
much is in it, possibly shared with other subvolumes.
Exclusive will be the amount of space that gets freed when
the subvolume is deleted.
MULTI-USER MACHINE
Restricting homes
When you have several users on a machine, with home
directories probably under /home, you might want to restrict
/home as a whole, while restricting every user to an
individual limit as well. This is easily accomplished by
creating a qgroup for /home , eg. 1/1, and assigning all user
subvolumes to it. Restricting this qgroup will limit /home,
while every user subvolume can get its own (lower) limit.
Accounting snapshots to the user
Let’s say the user is allowed to create snapshots via some
mechanism. It would only be fair to account space used by the
snapshots to the user. This does not mean the user doubles
his usage as soon as he takes a snapshot. Of course, files
that are present in his home and the snapshot should only be
accounted once. This can be accomplished by creating a qgroup
for each user, say 1/UID. The user home and all snapshots are
assigned to this qgroup. Limiting it will extend the limit to
all snapshots, counting files only once. To limit /home as a
whole, a higher level group 2/1 replacing 1/1 from the
previous example is needed, with all user qgroups assigned to
it.
Do not account snapshots
On the other hand, when the snapshots get created
automatically, the user has no chance to control them, so the
space used by them should not be accounted to him. This is
already the case when creating snapshots in the example from
the previous section.
Snapshots for backup purposes
This scenario is a mixture of the previous two. The user can
create snapshots, but some snapshots for backup purposes are
being created by the system. The user’s snapshots should be
accounted to the user, not the system. The solution is
similar to the one from section Accounting snapshots to the
user, but do not assign system snapshots to user’s qgroup.
disable <path>
Disable subvolume quota support for a filesystem.
enable <path>
Enable subvolume quota support for a filesystem.
rescan [-s] <path>
Trash all qgroup numbers and scan the metadata again with the
current config.
Options
-s
show status of a running rescan operation.
-w
wait for rescan operation to finish(can be already in
progress).
btrfs quota returns a zero exit status if it succeeds. Non zero
is returned in case of failure.
btrfs is part of btrfs-progs. Please refer to the btrfs wiki
http://btrfs.wiki.kernel.org for further details.
mkfs.btrfs(8), btrfs-subvolume(8), btrfs-qgroup(8)
This page is part of the btrfs-progs (btrfs filesystem tools)
project. Information about the project can be found at
⟨https://btrfs.wiki.kernel.org/index.php/Btrfs_source_repositories⟩.
If you have a bug report for this manual page, see
⟨https://btrfs.wiki.kernel.org/index.php/Problem_FAQ#How_do_I_report_bugs_and_issues.3F⟩.
This page was obtained from the project's upstream Git repository
⟨git://git.kernel.org/pub/scm/linux/kernel/git/kdave/btrfs-progs.git⟩
on 2024-06-14. (At that time, the date of the most recent commit
that was found in the repository was 2024-05-02.) If you
discover any rendering problems in this HTML version of the page,
or you believe there is a better or more up-to-date source for
the page, or you have corrections or improvements to the
information in this COLOPHON (which is not part of the original
manual page), send a mail to [email protected]
Btrfs v5.16.1 02/06/2022 BTRFS-QUOTA(8)
Pages that refer to this page: btrfs(8), btrfs-qgroup(8), btrfs-subvolume(8), mkfs.btrfs(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|