|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | DESCRIPTION | FILE FORMAT | EXAMPLE | SEE ALSO | COLOPHON |
|
|
|
FLATPAKREPO(5) flatpakrepo FLATPAKREPO(5)
flatpakrepo - Reference to a remote
Flatpak uses flatpakrepo files to share information about
remotes. The flatpakrepo file contains enough information to add
the remote. Use the flatpak remote-add --from command to do so.
flatpakrepo files may also contain additional information that is
useful when displaying a remote to the user, e.g. in an app
store.
The filename extension commonly used for flatpakrepo files is
.flatpakrepo.
flatpakrepo files can also be placed in /etc/flatpak/remotes.d/
to statically preconfigure system-wide remotes. Such files must
use the .flatpakrepo extension.
The flatpakrepo file is using the same .ini file format that is
used for systemd unit files or application .desktop files.
[Flatpak Repo]
All the information is contained in the [Flatpak Repo] group.
The following keys can be present in this group:
Version (uint64)
The version of the file format, must be 1 if present.
Url (string)
The url for the remote. This key is mandatory.
GPGKey (string)
The base64-encoded gpg key for the remote.
DefaultBranch (string)
The default branch to use for this remote.
Subset (string)
Limit the remote to the named subset of refs.
Title (string)
The title of the remote. This should be a user-friendly name
that can be displayed e.g. in an app store.
Comment (string)
A short summary of the remote, for display e.g. in an app
store.
Description (string)
A longer description of the remote, for display e.g. in an
app store.
Icon (string)
The url for an icon that can be used to represent the remote.
Homepage (string)
The url of a webpage describing the remote.
Filter (string)
The path of a local file to use to filter remote refs. See
flatpak-remote-add(1) for details on the format of the file.
Note: This field is treated a bit special by flatpak
remote-add. If you install a remote with --if-not-exists then
and the remote is already configured, then the filter field
of the remote configuration will be update anyway. And, if
the filter field is *not* specified then any existing filters
are cleared. The goal here is to allow a pre-configured
filtered remote to be replaced with the regular one if you
add the normal upstream (unfiltered) flatpakrepo file.
DeploySideloadCollectionID (string)
The collection ID of the remote, if it has one. This uniquely
identifies the collection of apps in the remote, to allow
peer to peer redistribution (see flatpak(1)). It is
recommended to use this key over DeployCollectionID or
CollectionID because only newer clients (Flatpak 1.12.8 or
later) pay attention to it (and older clients don't handle
collection IDs properly).
DeployCollectionID (string)
This is deprecated but still supported for backwards
compatibility. Use DeploySideloadCollectionID instead.
CollectionID (string)
This is deprecated but still supported for backwards
compatibility. Use DeploySideloadCollectionID instead.
[Flatpak Repo]
Title=gedit
Url=http://sdk.gnome.org/repo-apps/
GPGKey=mQENBFUUCGcBCAC/K9WeV4xCaKr3NKRqPXeY5mpaXAJyasLqCtrDx92WUgbu0voWrhohNAKpqizod2dvzc/XTxm3rHyIxmNfdhz1gaGhynU75Qw4aJVcly2eghTIl++gfDtOvrOZo/VuAq30f32dMIgHQdRwEpgCwz7WyjpqZYltPAEcCNL4MTChAfiHJeeiQ5ibystNBW8W6Ymf7sO4m4g5+/aOxI54oCOzD9TwBAe+yXcJJWtc2rAhMCjtyPJzxd0ZVXqIzCe1xRvJ6Rq7YCiMbiM2DQFWXKnmYQbj4TGNMnwNdAajCdrcBWEMSbzq7EzuThIJRd8Ky4BkEe1St6tuqwFaMZz+F9eXABEBAAG0KEdub21lIFNESyAzLjE2IDxnbm9tZS1vcy1saXN0QGdub21lLm9yZz6JATgEEwECACIFAlUUCGcCGwMGCwkIBwMCBhUIAgkKCwQWAgMBAh4BAheAAAoJEArkz6VV0VKBa5cH/0vXa31YgEjNk78gGFXqnQxdD1WYA87OYxDi189l4lA802EFTF4wCBuZyDOqdd5BhS3Ab0cR778DmZXRUP2gwe+1zTJypU2JMnDpkwJ4NK1VP6/tE4SAPrznBtmb76BKaWBqUfZ9Wq1zg3ugvqkZB/Exq+usypIOwQVp1KL58TrjBRda0HvRctzkNhr0qYAtkfLFe0GvksBp4vBm8uGwAx7fw/HbhIjQ9pekTwvB+5GwDPO/tSip/1bQfCS+XJB8Ffa04HYPLGedalnWBrwhYY+G/kn5Zh9L/AC8xeLwTJTHM212rBjPa9CWs9C6a57MSaeGIEHLC1hEyiJJ15w8jmY=
DeployCollectionID=org.gnome.Apps
flatpak(1), flatpak-remote-add(1), flatpakref(5)
This page is part of the flatpak (a tool for building and
distributing desktop applications on Linux) project. Information
about the project can be found at ⟨http://flatpak.org/⟩. It is
not known how to report bugs for this man page; if you know,
please send a mail to [email protected]. This page was obtained
from the project's upstream Git repository
⟨https://github.com/flatpak/flatpak⟩ on 2024-06-14. (At that
time, the date of the most recent commit that was found in the
repository was 2024-06-04.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
flatpak FLATPAKREPO(5)
Pages that refer to this page: flatpak(1), flatpak-remote-add(1), flatpakref(5), flatpak-remote(5)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|