|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | DESCRIPTION | OPTIONS | EXAMPLES | FILES | SEE ALSO | AUTHOR | COLOPHON |
|
|
|
FAILLOCK.CONF(5) Linux-PAM Manual FAILLOCK.CONF(5)
faillock.conf - pam_faillock configuration file
faillock.conf provides a way to configure the default settings
for locking the user after multiple failed authentication
attempts. This file is read by the pam_faillock module and is the
preferred method over configuring pam_faillock directly.
The file has a very simple name = value format with possible
comments starting with # character. The whitespace at the
beginning of line, end of line, and around the = sign is ignored.
dir=/path/to/tally-directory
The directory where the user files with the failure records
are kept. The default is /var/run/faillock.
Note: These files will disappear after reboot on systems
configured with directory /var/run/faillock mounted on
virtual memory.
audit
Will log the user name into the system log if the user is not
found.
silent
Don't print informative messages to the user. Please note
that when this option is not used there will be difference in
the authentication behavior for users which exist on the
system and non-existing users.
no_log_info
Don't log informative messages via syslog(3).
local_users_only
Only track failed user authentications attempts for local
users in /etc/passwd and ignore centralized (AD, IdM, LDAP,
etc.) users. The faillock(8) command will also no longer
track user failed authentication attempts. Enabling this
option will prevent a double-lockout scenario where a user is
locked out locally and in the centralized mechanism.
nodelay
Don't enforce a delay after authentication failures.
deny=n
Deny access if the number of consecutive authentication
failures for this user during the recent interval exceeds n.
The default is 3.
fail_interval=n
The length of the interval during which the consecutive
authentication failures must happen for the user account lock
out is n seconds. The default is 900 (15 minutes).
unlock_time=n
The access will be re-enabled after n seconds after the lock
out. The value 0 has the same meaning as value never - the
access will not be re-enabled without resetting the faillock
entries by the faillock(8) command. The default is 600 (10
minutes).
Note that the default directory that pam_faillock uses is
usually cleared on system boot so the access will be also
re-enabled after system reboot. If that is undesirable a
different tally directory must be set with the dir option.
Also note that it is usually undesirable to permanently lock
out users as they can become easily a target of denial of
service attack unless the usernames are random and kept
secret to potential attackers.
even_deny_root
Root account can become locked as well as regular accounts.
root_unlock_time=n
This option implies even_deny_root option. Allow access after
n seconds to root account after the account is locked. In
case the option is not specified the value is the same as of
the unlock_time option.
admin_group=name
If a group name is specified with this option, members of the
group will be handled by this module the same as the root
account (the options even_deny_root and root_unlock_time will
apply to them. By default the option is not set.
/etc/security/faillock.conf file example:
deny=4
unlock_time=1200
silent
/etc/security/faillock.conf
the config file for custom options
faillock(8), pam_faillock(8), pam.conf(5), pam.d(5), pam(8)
pam_faillock was written by Tomas Mraz. The support for
faillock.conf was written by Brian Ward.
This page is part of the linux-pam (Pluggable Authentication
Modules for Linux) project. Information about the project can be
found at ⟨http://www.linux-pam.org/⟩. If you have a bug report
for this manual page, see ⟨//www.linux-pam.org/⟩. This page was
obtained from the project's upstream Git repository
⟨https://github.com/linux-pam/linux-pam.git⟩ on 2023-12-22. (At
that time, the date of the most recent commit that was found in
the repository was 2023-12-18.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
Linux-PAM Manual 12/22/2023 FAILLOCK.CONF(5)
Pages that refer to this page: pam_faillock(8)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|