|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | FIELDS | EXAMPLE | BUGS | SEE ALSO | COLOPHON |
|
|
|
deb-control(5) dpkg suite deb-control(5)
deb-control - Debian binary package control file format
DEBIAN/control
Each Debian binary package contains a control file in its control
member, and its deb822(5) format is a subset of the
debian/control template source control file in Debian source
packages, see deb-src-control(5).
This file contains a number of fields. Each field begins with a
tag, such as Package or Version (case insensitive), followed by a
colon, and the body of the field (case sensitive unless stated
otherwise). Fields are delimited only by field tags. In other
words, field text may be multiple lines in length, but the
installation tools will generally join lines when processing the
body of the field (except in the case of the Description field,
see below).
Package: package-name (required)
The value of this field determines the package name, and is
used to generate file names by most installation tools.
Package-Type: deb|udeb|type
This field defines the type of the package. udeb is for
size-constrained packages used by the debian installer. deb
is the default value, it is assumed if the field is absent.
More types might be added in the future.
Version: version-string (required)
Typically, this is the original package's version number in
whatever form the program's author uses. It may also include
a Debian revision number (for non-native packages). The
exact format and sorting algorithm are described in
deb-version(7).
Maintainer: fullname-email (recommended)
Should be in the format “Joe Bloggs <[email protected]>”, and
is typically the person who created the package, as opposed
to the author of the software that was packaged.
Description: short-description (recommended)
long-description
The format for the package description is a short brief
summary on the first line (after the Description field). The
following lines should be used as a longer, more detailed
description. Each line of the long description must be
preceded by a space, and blank lines in the long description
must contain a single ‘.’ following the preceding space.
Section: section
This is a general field that gives the package a category
based on the software that it installs. Some common sections
are utils, net, mail, text, x11, etc.
Priority: priority
Sets the importance of this package in relation to the system
as a whole. Common priorities are required, standard,
optional, extra, etc.
The Section and Priority fields usually have a defined set of
accepted values based on the specific distribution policy.
Installed-Size: size
The approximate total size of the package's installed files,
in KiB units. The algorithm to compute the size is described
in deb-substvars(5).
Protected: yes|no
This field is usually only needed when the answer is yes. It
denotes a package that is required mostly for proper booting
of the system or used for custom system-local meta-packages.
dpkg(1) or any other installation tool will not allow a
Protected package to be removed (at least not without using
one of the force options).
Supported since dpkg 1.20.1.
Essential: yes|no
This field is usually only needed when the answer is yes. It
denotes a package that is required for the packaging system,
for proper operation of the system in general or during boot
(although the latter should be converted to Protected field
instead). dpkg(1) or any other installation tool will not
allow an Essential package to be removed (at least not
without using one of the force options).
Build-Essential: yes|no
This field is usually only needed when the answer is yes, and
is commonly injected by the archive software. It denotes a
package that is required when building other packages.
Architecture: arch|all (required)
The architecture specifies which type of hardware this
package was compiled for. Common architectures are amd64,
armel, i386, powerpc, etc. Note that the all value is meant
for packages that are architecture independent. Some
examples of this are shell and Perl scripts, and
documentation.
Origin: name
The name of the distribution this package is originating
from.
Bugs: url
The url of the bug tracking system for this package. The
current used format is bts-type://bts-address, like
debbugs://bugs.debian.org.
Homepage: url
The upstream project home page url.
Tag: tag-list
List of tags describing the qualities of the package. The
description and list of supported tags can be found in the
debtags package.
Multi-Arch: no|same|foreign|allowed
This field is used to indicate how this package should behave
on a multi-arch installations.
no This value is the default when the field is omitted, in
which case adding the field with an explicit no value is
generally not needed.
same
This package is co-installable with itself, but it must
not be used to satisfy the dependency of any package of a
different architecture from itself.
foreign
This package is not co-installable with itself, but
should be allowed to satisfy a non-arch-qualified
dependency of a package of a different arch from itself
(if a dependency has an explicit arch-qualifier then the
value foreign is ignored).
allowed
This allows reverse-dependencies to indicate in their
Depends field that they accept this package from a
foreign architecture by qualifying the package name with
:any, but has no effect otherwise.
Source: source-name [(source-version)]
The name of the source package that this binary package came
from, if it is different than the name of the package itself.
If the source version differs from the binary version, then
the source-name will be followed by a source-version in
parenthesis. This can happen for example on a binary-only
non-maintainer upload, or when setting a different binary
version via «dpkg-gencontrol -v».
Subarchitecture: value
Kernel-Version: value
Installer-Menu-Item: value
These fields are used by the debian-installer and are usually
not needed. For more details about them, see
<https://salsa.debian.org/installer-team/debian-installer/-/raw/master/doc/devel/modules.txt>.
Depends: package-list
List of packages that are required for this package to
provide a non-trivial amount of functionality. The package
maintenance software will not allow a package to be installed
if the packages listed in its Depends field aren't installed
(at least not without using the force options). In an
installation, the postinst scripts of packages listed in
Depends fields are run before those of the packages which
depend on them. On the opposite, in a removal, the prerm
script of a package is run before those of the packages
listed in its Depends field.
Pre-Depends: package-list
List of packages that must be installed and configured before
this one can be installed. This is usually used in the case
where this package requires another package for running its
preinst script.
Recommends: package-list
Lists packages that would be found together with this one in
all but unusual installations. The package maintenance
software will warn the user if they install a package without
those listed in its Recommends field.
Suggests: package-list
Lists packages that are related to this one and can perhaps
enhance its usefulness, but without which installing this
package is perfectly reasonable.
The syntax of Depends, Pre-Depends, Recommends and Suggests
fields is a list of groups of alternative packages. Each group
is a list of packages separated by vertical bar (or “pipe”)
symbols, ‘|’. The groups are separated by commas. Commas are to
be read as “AND”, and pipes as “OR”, with pipes binding more
tightly. Each package name is optionally followed by an
architecture qualifier appended after a colon ‘:’, optionally
followed by a version number specification in parentheses.
An architecture qualifier name can be a real Debian architecture
name (since dpkg 1.16.5) or any (since dpkg 1.16.2). If omitted,
the default is the current binary package architecture. A real
Debian architecture name will match exactly that architecture for
that package name, any will match any architecture for that
package name if the package has been marked as Multi-Arch:
allowed.
A version number may start with a ‘>>’, in which case any later
version will match, and may specify or omit the Debian packaging
revision (separated by a hyphen). Accepted version relationships
are ‘>>’ for greater than, ‘<<’ for less than, ‘>=’ for greater
than or equal to, ‘<=’ for less than or equal to, and ‘=’ for
equal to.
Breaks: package-list
Lists packages that this one breaks, for example by exposing
bugs when the named packages rely on this one. The package
maintenance software will not allow broken packages to be
configured; generally the resolution is to upgrade the
packages named in a Breaks field.
Conflicts: package-list
Lists packages that conflict with this one, for example by
containing files with the same names. The package
maintenance software will not allow conflicting packages to
be installed at the same time. Two conflicting packages
should each include a Conflicts line mentioning the other.
Replaces: package-list
List of packages files from which this one replaces. This is
used for allowing this package to overwrite the files of
another package and is usually used with the Conflicts field
to force removal of the other package, if this one also has
the same files as the conflicted package.
The syntax of Breaks, Conflicts and Replaces is a list of package
names, separated by commas (and optional whitespace). In the
Breaks and Conflicts fields, the comma should be read as “OR”.
An optional architecture qualifier can also be appended to the
package name with the same syntax as above, but the default is
any instead of the binary package architecture. An optional
version can also be given with the same syntax as above for the
Breaks, Conflicts and Replaces fields.
Enhances: package-list
This is a list of packages that this one enhances. It is
similar to Suggests but in the opposite direction.
Provides: package-list
This is a list of virtual packages that this one provides.
Usually this is used in the case of several packages all
providing the same service. For example, sendmail and exim
can serve as a mail server, so they provide a common package
(“mail-transport-agent”) on which other packages can depend.
This will allow sendmail or exim to serve as a valid option
to satisfy the dependency. This prevents the packages that
depend on a mail server from having to know the package names
for all of them, and using ‘|’ to separate the list.
The syntax of Provides is a list of package names, separated by
commas (and optional whitespace). An optional architecture
qualifier can also be appended to the package name with the same
syntax as above. If omitted, the default is the current binary
package architecture. An optional exact (equal to) version can
also be given with the same syntax as above (honored since dpkg
1.17.11).
Built-Using: package-list
This dependency field lists extra source packages that were
used during the build of this binary package, for license
compliance purposes. This is an indication to the archive
maintenance software that these extra source packages must be
kept whilst this binary package is maintained. This field
must be a comma-separated list of source package names with
strict ‘=’ version relationships enclosed within parenthesis.
Note that the archive maintenance software is likely to
refuse to accept an upload which declares a Built-Using
relationship which cannot be satisfied within the archive.
Static-Built-Using: package-list
This dependency field lists extra source packages that were
used during the build of this binary package, for static
building purposes (for example linking against static
libraries, builds for source-centered languages such as Go or
Rust, usage of header-only C/C++ libraries, injecting data
blobs into code, etc.). This is useful to track whether this
package might need to be rebuilt when source packages listed
here have been updated, for example due to security updates.
This field must be a comma-separated list of source package
names with strict ‘=’ version relationships enclosed within
parenthesis.
Supported since dpkg 1.21.3.
Built-For-Profiles: profile-list (obsolete)
This field used to specify a whitespace separated list of
build profiles that this binary packages was built with
(since dpkg 1.17.2 until 1.18.18). The information
previously found in this field can now be found in the
.buildinfo file, which supersedes it.
Auto-Built-Package: reason-list
This field specifies a whitespace separated list of reasons
why this package was auto-generated. Binary packages marked
with this field will not appear in the debian/control
template source control file. The only currently used reason
is debug-symbols.
Build-Ids: elf-build-id-list
This field specifies a whitespace separated list of ELF
build-ids. These are unique identifiers for semantically
identical ELF objects, for each of these within the package.
The format or the way to compute each build-id is not defined
by design.
Package: grep
Essential: yes
Priority: required
Section: base
Maintainer: Wichert Akkerman <[email protected]>
Architecture: sparc
Version: 2.4-1
Pre-Depends: libc6 (>= 2.0.105)
Provides: rgrep
Conflicts: rgrep
Description: GNU grep, egrep and fgrep.
The GNU family of grep utilities may be the "fastest grep in the west".
GNU grep is based on a fast lazy-state deterministic matcher (about
twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
search for a fixed string that eliminates impossible text from being
considered by the full regexp matcher without necessarily having to
look at every character. The result is typically many times faster
than Unix grep or egrep. (Regular expressions containing backreferencing
will run more slowly, however).
The Build-Ids field uses a rather generic name out of its
original context within an ELF object, which serves a very
specific purpose and executable format.
deb822(5), deb-src-control(5), deb(5), deb-version(7),
debtags(1), dpkg(1), dpkg-deb(1).
This page is part of the dpkg (Debian Package Manager) project.
Information about the project can be found at
⟨https://wiki.debian.org/Teams/Dpkg/⟩. If you have a bug report
for this manual page, see
⟨http://bugs.debian.org/cgi-bin/pkgreport.cgi?src=dpkg⟩. This
page was obtained from the project's upstream Git repository ⟨git
clone https://git.dpkg.org/git/dpkg/dpkg.git⟩ on 2024-06-14. (At
that time, the date of the most recent commit that was found in
the repository was 2024-05-21.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
1.22.6-77-g86fe7 2024-03-10 deb-control(5)
Pages that refer to this page: dpkg(1), dpkg-deb(1), dpkg-gencontrol(1), dpkg-name(1), dpkg-parsechangelog(1), dpkg-split(1), deb(5), deb-old(5), deb-shlibs(5), deb-src-control(5), deb-version(7)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|