|
STG-EMAIL(1) StGit Manual STG-EMAIL(1)
stg-email - Format and send patches as email
stg email format [OPTIONS] <patch>... stg email format [OPTIONS] --all stg email send [OPTIONS] <file|directory>... stg email send [OPTIONS] <patch>... stg email send [OPTIONS] --all stg email send --dump-aliases stg email help format stg email help send stg email help help
Format and send patches as email. A typical workflow is to first generate email files for each patch along with an optional cover letter using ‘stg email format. Then, after checking the email files’ contents, sending the emails using `stg email send. This workflow may be condensed to one step by specifying patch names to stg email send instead of email files. The format and send subcommands are thin wrappers over git format-patch and git send-email, respectively. Refer to the git-format-patch(1) and git-send-email(1) manpages for more details about configuration and options.
format Format selected patches as email files, one patch per file. The files are formatted to resemble a UNIX mailbox (mbox) and may be sent with the stg email send command. The first line of the patch’s commit message is used to form the email’s subject with the remainder of the message in the email’s body. The patches to format may be specified as individual patch names or patch ranges of the form p0..p3, or --all may be used to format all applied patches. Note that the specified patches must be contiguous within the patch series. By default, the email files will be output to the current directory, however use of the -o/--output-directory option is recommended since sending the email with stg email send <dir> is simpler than specifying all the email files individually. A cover letter template may also be generated by specifying --cover-letter. A cover letter is recommended when sending multiple patches. The format.coverLetter configuration value may be set true to always generate a cover letter or auto to generate a cover letter when formatting more than one patch. Recipients may be specified using the --to and --cc, or setting recipients may be deferred to stg email send. Many aspects of the format behavior may be controlled via format.* configuration values. Refer to the git-config(1) and git-format-patch(1) man pages for more details. send Send patches as emails. This is a wrapper for git send-email. Refer to the git-send-email(1) man page for additional details. The patches to send may be specified as files or directories generated by stg email format, or as patch names/ranges as would be supplied to stg email format. Specifying a directory will send all files in that directory. The header of the email is configurable via command line options. The user will be prompted for any necessary information not specified on the command line or in the configuration. Many aspects of the send behavior may be controlled via the sendemail.* configuration options. In particular, it is recommended to statically configure SMTP details such as sendemail.smtpServer, sendemail.smtpUser, etc. Refer to git-config(1) and git-send-email(1) man pages for more detail on all the available configuration options. FORMAT OPTIONS -b <branch>, --branch=<branch> Use <branch> instead of current branch -a, --all Format all applied patches -G <option>, --git-opt=<option> Pass additional <option> to git format-patch. See the git-format-patch(1) man page. This option may be specified multiple times. -o <dir>, --output-directory=<dir> Use <dir> to store the output files instead of the current working directory. --cover-letter In addition to the patches, generate a cover letter file containing the branch description, shortlog and the overall diffstat. You can fill in a description in the file before sending it out. -n, --numbered Use [PATCH n/m] even with a single patch -N, --no-numbered Use [PATCH] even with multiple patches --start-number=<n> Start numbering at <n> instead of 1 -v <n>, --reroll-count=<n> Mark the series as the <n>-th iteration of the topic. The output filenames have "v<n>" prepended to them, and the subject prefix ("PATCH" by default, but configurable via the --subject-prefix option) has ` v<N>` appended to it. E.g. --reroll-count=4 may produce v4-0001-add-makefile.patch file that has "Subject: [PATCH v4 1/20] Add makefile" in it. <N> does not have to be an integer (e.g. --reroll-count=4.4, or --reroll-count=4rev2 are allowed), but the downside of using such a reroll-count is that the range-diff/interdiff with the previous version does not state exactly which version the new iteration is compared against. --rfc Alias for --subject-prefix="RFC PATCH". RFC means "Request For Comments"; use this when sending an experimental patch for discussion rather than application. --subject-prefix=<prefix> Instead of the standard [PATCH] prefix in the subject line, instead use [<prefix>]. This allows for useful naming of a patch series, and can be combined with the --numbered option. --quiet Do not print the names of the generated files -s, --signoff Add a Signed-off-by trailer to the commit message, using the committer identity of yourself. See the signoff option in git-commit(1) for more information. --numbered-files Output file names will be a simple number sequence without the default first line of the commit appended. --suffix=<suffix> Instead of using .patch as the suffix for generated filenames, use specified suffix. A common alternative is --suffix=.txt. Leaving this empty will remove the .patch suffix. -k, --keep-subject Do not strip/add [PATCH] from the first line of the commit log message. --no-binary Do not output contents of changes in binary files, instead display a notice that those files changed. Patches generated using this option cannot be applied properly, but they are still useful for code review. --zero-commit Output an all-zero hash in each patch’s From header instead of the hash of the commit. --to=<address> Add a To: header to the email headers. This is in addition to any configured headers, and may be used multiple times. The negated form --no-to discards all To: headers added so far (from config or command line). --no-to Discard all To: addresses added so far from config or command line. --cc=<address> Add a Cc: header to the email headers. This is in addition to any configured headers, and may be used multiple times. The negated form --no-cc discards all Cc: headers added so far (from config or command line). --no-cc Discard all Cc: addresses added so far from config or command line. --in-reply-to=<message-id> Make the first mail (or all the mails with --no-thread) appear as a reply to the given <message-id>, which avoids breaking threads to provide a new patch series. --add-header=<header> Add an arbitrary header to the email headers. This is in addition to any configured headers, and may be used multiple times. For example, --add-header="Organization: git-foo". --attach Create multipart/mixed attachment, the first part of which is the commit message and the patch itself in the second part, with Content-Disposition: attachment. --inline Create multipart/mixed attachment, the first part of which is the commit message and the patch itself in the second part, with Content-Disposition: inline. --thread[=<style>] Controls addition of In-Reply-To and References headers to make the second and subsequent mails appear as replies to the first. Also controls generation of the Message-ID header to reference. The optional <style> argument can be either shallow or deep. shallow threading makes every mail a reply to the head of the series, where the head is chosen from the cover letter, the --in-reply-to, and the first patch mail, in this order. deep threading makes every mail a reply to the previous one. The default is --no-thread, unless the format.thread configuration is set. If --thread is specified without a style, it defaults to the style specified by format.thread if any, or else shallow. Beware that the default for git send-email is to thread emails itself. If you want git format-patch to take care of threading, you will want to ensure that threading is disabled for git send-email. --no-thread Disable message threading --signature=<signature> Add a signature string to each email. The default signature is the git version number, or the format.signature configuration value, if specified. The signature may be disabled with --no-signature --no-signature Do not add a signature to each email --signature-file=<file> Like --signature except the signature is read from a file. --base=<committish> See the BASE TREE INFORMATION section of git-format-patch(1). --progress Show progress reports on stderr as patches are generated. --interdiff=<rev> As a reviewer aid, insert an interdiff into the cover letter, or as commentary of the lone patch of a 1-patch series, showing the differences between the previous version of the patch series and the series currently being formatted. <rev> is a single revision naming the tip of the previous series which shares a common base with the series being formatted (for example git format-patch --cover-letter --interdiff=feature/v1 -3 feature/v2). --range-diff=<refspec> As a reviewer aid, insert a range-diff (see git-range-diff(1)) into the cover letter, or as commentary of the lone patch of a single-patch series, showing the differences between the previous version of the patch series and the series currently being formatted. <refspec> can be a single revision naming the tip of the previous series if it shares a common base with the series being formatted (for example git format-patch --cover-letter --range-diff=feature/v1 -3 feature/v2), or a revision range if the two versions of the series are disjoint (for example git format-patch --cover-letter --range-diff=feature/v1~3..feature/v1 -3 feature/v2). Note that diff options passed to the command affect how the primary product of format-patch is generated, and they are not passed to the underlying range-diff machinery used to generate the cover-letter material (this may change in the future). --creation-factor=<n> Used with --range-diff, tweak the heuristic which matches up commits between the previous and current series of patches by adjusting the creation/deletion cost fudge factor. See git-range-diff(1)) for details. SEND OPTIONS -b <branch>, --branch=<branch> Use <branch> instead of current branch -a, --all Send all applied patches -G <option>, --git-opt=<option> Pass additional <option> to git send-email. See the git-send-email(1) man page. This option may be specified multiple times. --from=<address> Specify the sender of the emails. If not specified on the command line, the value of the sendemail.from configuration option is used. If neither the command-line option nor sendemail.from are set, then the user will be prompted for the value. The default for the prompt will be the value of GIT_AUTHOR_IDENT, or GIT_COMMITTER_IDENT if that is not set, as returned by git var -l. --to=<address> Specify the primary recipient of the emails generated. Generally, this will be the upstream maintainer of the project involved. Default is the value of the sendemail.to configuration value; if that is unspecified, and --to-cmd is not specified, this will be prompted for. This option may be specified multiple times. --cc=<address> Specify a starting "Cc:" value for each email. Default is the value of sendemail.cc. This option may be specified multiple times. --bcc=<address> Specify a starting "Bcc:" value for each email. Default is the value of sendemail.bcc. This option may be specified multiple times. --subject=<subject> Specify the initial subject of the email thread. Only necessary if --compose is also set. If --compose is not set, this will be prompted for. --reply-to=<address> Specify the address where replies from recipients should go to. Use this if replies to messages should go to another address than what is specified with the --from parameter. --in-reply-to=<id> Make the first mail (or all the mails with --no-thread) appear as a reply to the given Message-ID, which avoids breaking threads to provide a new patch series. The second and subsequent emails will be sent as replies according to the --[no-]chain-reply-to setting. So for example when --thread and --no-chain-reply-to are specified, the second and subsequent patches will be replies to the first one like in the illustration below where [PATCH v2 0/3] is in reply to [PATCH 0/2]: [PATCH 0/2] Here is what I did... [PATCH 1/2] Clean up and tests [PATCH 2/2] Implementation [PATCH v2 0/3] Here is a reroll [PATCH v2 1/3] Clean up [PATCH v2 2/3] New tests [PATCH v2 3/3] Implementation Only necessary if --compose is also set. If --compose is not set, this will be prompted for. --compose Invoke a text editor (see GIT_EDITOR in git-var(1)) to edit an introductory message for the patch series. When --compose is used, git send-email will use the From, Subject, and In-Reply-To headers specified in the message. If the body of the message (what you type after the headers and a blank line) only contains blank (or Git: prefixed) lines, the summary will not be sent, but From, Subject, and In-Reply-To headers will be used unless they are removed. Missing From or In-Reply-To headers will be prompted for. See the CONFIGURATION section of git-send-email(1) for sendemail.multiEdit. --annotate Review and edit each patch you are about to send. Default is the value of sendemail.annotate. --identity=<id> A configuration identity. When given, causes values in the sendemail.<identity> subsection to take precedence over values in the sendemail section. The default identity is the value of sendemail.identity. --no-thread If threading is enabled, the In-Reply-To and References headers will be added to each email sent. Whether each mail refers to the previous email (deep threading per git format-patch wording) or to the first email (shallow threading) is governed by --[no-]chain-reply-to. If disabled with --no-thread, those headers will not be added (unless specified with --in-reply-to). Default is the value of the sendemail.thread configuration value; if that is unspecified, default to --thread. It is up to the user to ensure that no In-Reply-To header already exists when git send-email is asked to add it (especially note that git format-patch can be configured to do the threading itself). Failure to do so may not produce the expected result in the recipient’s MUA. --confirm=<mode> Confirm just before sending. Default is the value of sendemail.confirm configuration value; if that is unspecified, default to auto unless any of the suppress options have been specified, in which case default to compose. Confirmation modes: • always will always confirm before sending • never will never confirm before sending • cc will confirm before sending when send-email has automatically added addresses from the patch to the Cc list • compose will confirm before sending the first message when using --compose • auto is equivalent to cc + compose --quiet Make git-send-email less verbose. One line per email should be all that is output. --dry-run Do everything except actually send the emails. --dump-aliases Dump configured aliases and exit -n, --numbered Use [PATCH n/m] even with a single patch -N, --no-numbered Use [PATCH] even with multiple patches --start-number=<n> Start numbering at <n> instead of 1 -v <n>, --reroll-count=<n> Mark the series as the <n>th reroll --rfc Use [RFC PATCH] instead of [PATCH] --subject-prefix=<prefix> Use [<prefix>] instead of [PATCH]
Part of the StGit suite - see stg(1)
This page is part of the stgit (Stacked Git) project.
Information about the project can be found at
⟨http://www.procode.org/stgit/⟩. If you have a bug report for
this manual page, see ⟨http://www.procode.org/stgit/⟩. This page
was obtained from the project's upstream Git repository
⟨https://github.com/stacked-git/stgit.git⟩ on 2024-06-14. (At
that time, the date of the most recent commit that was found in
the repository was 2024-05-22.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
StGit 2.4.7 06/14/2024 STG-EMAIL(1)
Pages that refer to this page: stg(1)