|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|
|
NAME | SYNOPSIS | DESCRIPTION | OPTIONS | LIMITATIONS | ENVIRONMENT VARIABLES | FILES | EXIT STATUS | BUGS | RESOURCES | COPYRIGHTS | THANKS | AUTHORS | SEE ALSO | COLOPHON |
|
|
|
LTTNG-ENABLE-CHANN(1) LTTng Manual LTTNG-ENABLE-CHANN(1)
lttng-enable-channel - Create or enable LTTng channels
Create a Linux kernel channel:
lttng [GENERAL OPTIONS] enable-channel --kernel
[--overwrite] [--output=(mmap | splice)]
[--subbuf-size=SIZE] [--num-subbuf=COUNT]
[--switch-timer=PERIODUS] [--read-timer=PERIODUS]
[--monitor-timer=PERIODUS]
[--tracefile-size=SIZE] [--tracefile-count=COUNT]
[--session=SESSION] CHANNEL
Create a user space channel:
lttng [GENERAL OPTIONS] enable-channel --userspace
[--overwrite | --blocking-timeout=TIMEOUTUS] [--buffers-pid]
[--subbuf-size=SIZE] [--num-subbuf=COUNT]
[--switch-timer=PERIODUS] [--read-timer=PERIODUS]
[--monitor-timer=PERIODUS]
[--tracefile-size=SIZE] [--tracefile-count=COUNT]
[--session=SESSION] CHANNEL
Enable existing channel(s):
lttng [GENERAL OPTIONS] enable-channel (--userspace | --kernel)
[--session=SESSION] CHANNEL[,CHANNEL]...
The lttng enable-channel command can create a new channel, or
enable one or more existing and disabled ones.
A channel is the owner of sub-buffers holding recorded events.
Event, rules, when created using lttng-enable-event(1), are
always assigned to a channel. When creating a new channel, many
parameters related to those sub-buffers can be fine-tuned. They
are described in the subsections below.
When CHANNEL does not name an existing channel, a channel named
CHANNEL is created. Otherwise, the disabled channel named CHANNEL
is enabled.
Note that the lttng-enable-event(1) command can automatically
create default channels when no channel exist.
A channel is always contained in a tracing session (see
lttng-create(1) for creating a tracing session). The session in
which a channel is created using lttng enable-channel can be
specified using the --session option. If the --session option is
omitted, the current tracing session is targeted.
Existing enabled channels can be disabled using
lttng-disable-channel(1). Channels of a given session can be
listed using lttng-list(1).
See the LIMITATIONS section below for a list of limitations of
this command to consider.
Event loss modes
LTTng tracers are non-blocking by default: when no empty
sub-buffer exists, losing events is acceptable when the
alternative would be to cause substantial delays in the
instrumented application’s execution.
LTTng privileges performance over integrity, aiming at perturbing
the traced system as little as possible in order to make tracing
of subtle race conditions and rare interrupt cascades possible.
You can allow the user space tracer to block with a --blocking-
timeout option set to a positive value or to inf, and with an
application which is instrumented with LTTng-UST started with a
set LTTNG_UST_ALLOW_BLOCKING environment variable. See
lttng-ust(3) for more details.
When it comes to losing events because no empty sub-buffer is
available, the channel’s event loss mode, specified by one of the
--discard and --overwrite options, determines what to do amongst:
Discard
Drop the newest events until a sub-buffer is released.
Overwrite
Clear the sub-buffer containing the oldest recorded events
and start recording the newest events there. This mode is
sometimes called flight recorder mode because it behaves like
a flight recorder: always keep a fixed amount of the latest
data.
Which mechanism to choose depends on the context: prioritize the
newest or the oldest events in the ring buffer?
Beware that, in overwrite mode (--overwrite option), a whole
sub-buffer is abandoned as soon as a new event doesn’t find an
empty sub-buffer, whereas in discard mode (--discard option),
only the event that doesn’t fit is discarded.
Also note that a count of lost events is incremented and saved in
the trace itself when an event is lost in discard mode, whereas
no information is kept when a sub-buffer gets overwritten before
being committed.
The probability of losing events, if it is experience in a given
context, can be reduced by fine-tuning the sub-buffers count and
size (see next subsection).
Sub-buffers count and size
The --num-subbuf and --subbuf-size options respectively set the
number of sub-buffers and their individual size when creating a
new channel.
Note that there is a noticeable tracer’s CPU overhead introduced
when switching sub-buffers (marking a full one as consumable and
switching to an empty one for the following events to be
recorded). Knowing this, the following list presents a few
practical situations along with how to configure sub-buffers for
them when creating a channel in overwrite mode (--overwrite
option):
High event throughput
In general, prefer bigger sub-buffers to lower the risk of
losing events. Having bigger sub-buffers also ensures a lower
sub-buffer switching frequency. The number of sub-buffers is
only meaningful if the channel is enabled in overwrite mode:
in this case, if a sub-buffer overwrite happens, the other
sub-buffers are left unaltered.
Low event throughput
In general, prefer smaller sub-buffers since the risk of
losing events is already low. Since events happen less
frequently, the sub-buffer switching frequency should remain
low and thus the tracer’s overhead should not be a problem.
Low memory system
If the target system has a low memory limit, prefer fewer
first, then smaller sub-buffers. Even if the system is
limited in memory, it is recommended to keep the sub-buffers
as big as possible to avoid a high sub-buffer switching
frequency.
In discard mode (--discard option), the sub-buffers count
parameter is pointless: using two sub-buffers and setting their
size according to the requirements of the context is fine.
Switch timer
When a channel’s switch timer fires, a sub-buffer switch happens.
This timer may be used to ensure that event data is consumed and
committed to trace files periodically in case of a low event
throughput.
It’s also convenient when big sub-buffers are used to cope with
sporadic high event throughput, even if the throughput is
normally lower.
Use the --switch-timer option to control the switch timer’s
period of the channel to create.
Read timer
By default, an internal notification mechanism is used to signal
a full sub-buffer so that it can be consumed. When such
notifications must be avoided, for example in real-time
applications, the channel’s read timer can be used instead. When
the read timer fires, sub-buffers are checked for consumption
when they are full.
Use the --read-timer option to control the read timer’s period of
the channel to create.
Monitor timer
When a channel’s monitor timer fires, its registered trigger
conditions are evaluated using the current values of its
properties (for example, the current usage of its sub-buffers).
When a trigger condition is true, LTTng executes its associated
action. The only type of action currently supported is to notify
one or more user applications.
See the installed C/C++ headers in lttng/action, lttng/condition,
lttng/notification, and lttng/trigger to learn more about
application notifications and triggers.
Use the --monitor-timer option to control the monitor timer’s
period of the channel to create.
Buffering scheme
In the user space tracing domain, two buffering schemes are
available when creating a channel:
Per-process buffering (--buffers-pid option)
Keep one ring buffer per process.
Per-user buffering (--buffers-uid option)
Keep one ring buffer for all the processes of a single user.
The per-process buffering scheme consumes more memory than the
per-user option if more than one process is instrumented for
LTTng-UST. However, per-process buffering ensures that one
process having a high event throughput won’t fill all the shared
sub-buffers, only its own.
The Linux kernel tracing domain only has one available buffering
scheme which is to use a single ring buffer for the whole system
(--buffers-global option).
Trace files limit and size
By default, trace files can grow as large as needed. The maximum
size of each trace file written by a channel can be set on
creation using the --tracefile-size option. When such a trace
file’s size reaches the channel’s fixed maximum size, another
trace file is created to hold the next recorded events. A file
count is appended to each trace file name in this case.
If the --tracefile-size option is used, the maximum number of
created trace files is unlimited. To limit them, the --tracefile-
count option can be used. This option is always used in
conjunction with the --tracefile-size option.
For example, consider this command:
$ lttng enable-channel --kernel --tracefile-size=4096 \
--tracefile-count=32 my-channel
Here, for each stream, the maximum size of each trace file is 4
kiB and there can be a maximum of 32 different files. When there
is no space left in the last file, trace file rotation happens:
the first file is cleared and new sub-buffers containing events
are written there.
LTTng does not guarantee that you can view the trace of an active
tracing session (before you run the lttng-stop(1) command), even
with multiple trace files, because LTTng could overwrite them at
any moment, or some of them could be incomplete. You can archive
a tracing session’s current trace chunk while the tracing session
is active to obtain an unmanaged and self-contained LTTng trace:
see lttng-rotate(1) and lttng-enable-rotation(1).
General options are described in lttng(1).
Domain
One of:
-k, --kernel
Enable channel in the Linux kernel domain.
-u, --userspace
Enable channel in the user space domain.
Target
-s SESSION, --session=SESSION
Create or enable channel in the tracing session named SESSION
instead of the current tracing session.
Event loss mode
--blocking-timeout=TIMEOUTUS
Set the channel’s blocking timeout value to TIMEOUTUS µs for
instrumented applications executed with a set
LTTNG_UST_ALLOW_BLOCKING environment variable:
0 (default)
Do not block (non-blocking mode).
inf
Block forever until room is available in the sub-buffer
to write the event record.
n, a positive value
Wait for at most n µs when trying to write into a
sub-buffer. After n µs, discard the event record.
This option is only available with the --userspace option and
without the --overwrite option.
One of:
--discard
Discard events when sub-buffers are full (default).
--overwrite
Flight recorder mode: always keep a fixed amount of the
latest data.
Sub-buffers
--num-subbuf=COUNT
Use COUNT sub-buffers. Rounded up to the next power of two.
Default values:
• --userspace and --buffers-uid options: 4
• --userspace and --buffers-pid options: 4
• --kernel option: 4
• metadata channel: 2
--output=TYPE
Set channel’s output type to TYPE.
Available types: mmap (always available) and splice (only
available with the --kernel option).
Default values:
• --userspace and --buffers-uid options: mmap
• --userspace and --buffers-pid options: mmap
• --kernel option: splice
• metadata channel: mmap
--subbuf-size=SIZE
Set the individual size of sub-buffers to SIZE bytes. The k
(kiB), M (MiB), and G (GiB) suffixes are supported. Rounded
up to the next power of two.
The minimum sub-buffer size, for each tracer, is the maximum
value between the default below and the system’s page size.
The following command shows the current system’s page size:
getconf PAGE_SIZE.
Default values:
• --userspace and --buffers-uid options: 524288
• --userspace and --buffers-pid options: 16384
• --kernel option: 1048576
• metadata channel: 4096
Buffering scheme
One of:
--buffers-global
Use shared sub-buffers for the whole system (only available
with the --kernel option).
--buffers-pid
Use different sub-buffers for each traced process (only
available with the the --userspace option). This is the
default buffering scheme for user space channels.
--buffers-uid
Use shared sub-buffers for all the processes of the user
running the command (only available with the --userspace
option).
Trace files
--tracefile-count=COUNT
Limit the number of trace files created by this channel to
COUNT. 0 means unlimited. Default: 0.
Use this option in conjunction with the --tracefile-size
option.
The file count within a stream is appended to each created
trace file. If COUNT files are created and more events need
to be recorded, the first trace file of the stream is cleared
and used again.
--tracefile-size=SIZE
Set the maximum size of each trace file written by this
channel within a stream to SIZE bytes. 0 means unlimited.
Default: 0.
Note: traces generated with this option may inaccurately
report discarded events as of CTF 1.8.
Timers
--monitor-timer
Set the channel’s monitor timer’s period to PERIODUS µs. 0
means a disabled monitor timer.
Default values:
• --userspace and --buffers-uid options: 1000000
• --userspace and --buffers-pid options: 1000000
• --kernel option: 1000000
--read-timer
Set the channel’s read timer’s period to PERIODUS µs. 0 means
a disabled read timer.
Default values:
• --userspace and --buffers-uid options: 0
• --userspace and --buffers-pid options: 0
• --kernel option: 200000
• metadata channel: 0
--switch-timer=PERIODUS
Set the channel’s switch timer’s period to PERIODUS µs. 0
means a disabled switch timer.
Default values:
• --userspace and --buffers-uid options: 0
• --userspace and --buffers-pid options: 0
• --kernel option: 0
• metadata channel: 0
Program information
-h, --help
Show command help.
This option, like lttng-help(1), attempts to launch
/usr/bin/man to view the command’s man page. The path to the
man pager can be overridden by the LTTNG_MAN_BIN_PATH
environment variable.
--list-options
List available command options.
As of this version of LTTng, it is not possible to perform the
following actions with the lttng enable-channel command:
• Reconfigure a channel once it is created.
• Re-enable a disabled channel once its tracing session has
been active at least once.
• Create a channel once its tracing session has been active at
least once.
• Create a user space channel with a given buffering scheme
(--buffers-uid or --buffers-pid options) and create a second
user space channel with a different buffering scheme in the
same tracing session.
LTTNG_ABORT_ON_ERROR
Set to 1 to abort the process after the first error is
encountered.
LTTNG_HOME
Overrides the $HOME environment variable. Useful when the
user running the commands has a non-writable home directory.
LTTNG_MAN_BIN_PATH
Absolute path to the man pager to use for viewing help
information about LTTng commands (using lttng-help(1) or
lttng COMMAND --help).
LTTNG_SESSION_CONFIG_XSD_PATH
Path in which the session.xsd session configuration XML
schema may be found.
LTTNG_SESSIOND_PATH
Full session daemon binary path.
The --sessiond-path option has precedence over this
environment variable.
Note that the lttng-create(1) command can spawn an LTTng session
daemon automatically if none is running. See lttng-sessiond(8)
for the environment variables influencing the execution of the
session daemon.
$LTTNG_HOME/.lttngrc
User LTTng runtime configuration.
This is where the per-user current tracing session is stored
between executions of lttng(1). The current tracing session
can be set with lttng-set-session(1). See lttng-create(1) for
more information about tracing sessions.
$LTTNG_HOME/lttng-traces
Default output directory of LTTng traces. This can be
overridden with the --output option of the lttng-create(1)
command.
$LTTNG_HOME/.lttng
User LTTng runtime and configuration directory.
$LTTNG_HOME/.lttng/sessions
Default location of saved user tracing sessions (see
lttng-save(1) and lttng-load(1)).
/usr/local/etc/lttng/sessions
System-wide location of saved tracing sessions (see
lttng-save(1) and lttng-load(1)).
Note
$LTTNG_HOME defaults to $HOME when not explicitly set.
0
Success
1
Command error
2
Undefined command
3
Fatal error
4
Command warning (something went wrong during the command)
If you encounter any issue or usability problem, please report it
on the LTTng bug tracker <https://bugs.lttng.org/projects/lttng-
tools>.
• LTTng project website <https://lttng.org>
• LTTng documentation <https://lttng.org/docs>
• Git repositories <http://git.lttng.org>
• GitHub organization <http://github.com/lttng>
• Continuous integration <http://ci.lttng.org/>
• Mailing list <http://lists.lttng.org> for support and
development: [email protected]
• IRC channel <irc://irc.oftc.net/lttng>: #lttng on
irc.oftc.net
This program is part of the LTTng-tools project.
LTTng-tools is distributed under the GNU General Public License
version 2 <http://www.gnu.org/licenses/old-
licenses/gpl-2.0.en.html>. See the LICENSE
<https://github.com/lttng/lttng-tools/blob/master/LICENSE> file
for details.
Special thanks to Michel Dagenais and the DORSAL laboratory
<http://www.dorsal.polymtl.ca/> at École Polytechnique de
Montréal for the LTTng journey.
Also thanks to the Ericsson teams working on tracing which helped
us greatly with detailed bug reports and unusual test cases.
LTTng-tools was originally written by Mathieu Desnoyers, Julien
Desfossez, and David Goulet. More people have since contributed
to it.
LTTng-tools is currently maintained by Jérémie Galarneau
<mailto:[email protected]>.
lttng-disable-channel(1), lttng(1), lttng-ust(3)
This page is part of the LTTng-Tools ( LTTng tools) project.
Information about the project can be found at
⟨http://lttng.org/⟩. It is not known how to report bugs for this
man page; if you know, please send a mail to [email protected].
This page was obtained from the project's upstream Git repository
⟨git://git.lttng.org/lttng-tools.git⟩ on 2019-11-19. (At that
time, the date of the most recent commit that was found in the
repository was 2019-11-14.) If you discover any rendering
problems in this HTML version of the page, or you believe there
is a better or more up-to-date source for the page, or you have
corrections or improvements to the information in this COLOPHON
(which is not part of the original manual page), send a mail to
[email protected]
LTTng 2.12.0-pre 10/29/2018 LTTNG-ENABLE-CHANN(1)
Pages that refer to this page: lttng(1), lttng-add-context(1), lttng-create(1), lttng-disable-channel(1), lttng-disable-rotation(1), lttng-enable-rotation(1), lttng-metadata(1), lttng-regenerate(1), lttng-rotate(1), lttng-ust(3)
|
HTML rendering created 2024-06-26 by Michael Kerrisk, author of The Linux Programming Interface. For details of in-depth Linux/UNIX system programming training courses that I teach, look here. Hosting by jambit GmbH. |
|